Abstract:Material response and the launch of laser plasma during the 1064 nm nanosecond laser pulse induced damage to the exit surface of fused silica are investigated. Employing a polarization-based two-frame shadowgraphy setup with ～ 60 fs probing resolution, the transient material responses from the rising part of nanosecond pumping pulse to several hundred nanosecond timescale are captured. Using a shearing interferometry setup, the evolution of transient phase shift of laser plasma in the expansion process to the ambient air is also investigated. Inhomogeneous distribution of phase shift caused by the electrons and neutrals in the plasma is quantitatively resolved by employing the fast Fourier transform based filtering algorism. To demonstrate the evolutions of important plasma parameters such as pressure, temperature and density, a continuum hydrodynamic model is numerically solved. The initial pressure of plasma is estimated according to the point-explosion model, and the initial plasma temperature is achieved by calculating the difference between simulating shockwave front radius and experimental value at the same delay. The optimal temperature is chosen when the radius difference is minimal. Main conclusions are as follows. 1) Abundant suprathermal electrons are excited in the early energy deposition process. Part of these electrons contribute to the thermal transport process and produce the laser supported solid-state absorption front (LSSAF) which propagates into the bulk silica. Other electrons escape to the air side and contribute to the formation of air plasma through the impact ionization process. Plasma expansion speed is about 20 km/s during this phase. 2) When the pump pulse is terminated, the LSSAF and air plasma lose their energy supplied and experience a rapid decline of the temperature and expansion velocity. As a result, the final damage crater depth exhibits seldomly no increase compared with the transient crater depth during this phase. Hot bulk plasma formed in this phase becomes the damage precursor and induces the ejection of abundant neutrals probably due to the phase explosion mechanism. Inhomogeneous distribution of stress is formed by Rayleigh-Taylor instability at the interface between hot bulk plasma and surrounding bulk material during the expansion of LSSAF. Radial and circumferential cracks are formed due to the release of stress. 3) Evolution of air plasma follows the conventional evolution process of laser-induced plasma, i. e. , internal pressure, temperature and density decrease quickly with time delay. The simulated transient highest pressure is about 600 MPa. Simulation also predicts the formation of the internal shockwave. Our work will be helpful in understanding the laser damage mechanism of the fused silica optical window.

Bulk damage growth characteristics and ultrafast diagnosis of fluoride-containing phosphate glasses induced by 355-nm laser

Laser-induced fluorescence and its effect on the damage resistance of fluoride-containing phosphate-based glasses

On Laser-Induced Damage Features in an Ultraviolet (uv) Fluorophosphate Glass when Irradiated with A Nanosecond Laser Beam

The Damage Property of Oxyfluoride Glasses Irradiated by a 351 Nm High Fluence Laser

Femtosecond laser-induced damage characteristics of mid-infrared oxyfluorogallate glass

Thermodynamic damage behavior of single-crystal MgF2 irradiated by high-power fiber laser

Luminescence in the Fluoride-Containing Phosphate-Based Glasses: a Possible Origin of Their High Resistance to Nanosecond Pulse Laser-Induced Damage.

Preparation Of The Oxyfluoride Glass With High 3 Omega Laser Induced Damage Threshold

Evolutionary Mechanism of the Defects in the Fluoride-Containing Phosphate Based Glasses Induced by Gamma Radiation.

Natural Healing Behavior of Gamma Radiation Induced Defects in Multicomponent Phosphate Glasses Used for High Energy Uv Lasers

Experimental Investigation of Enhancing the Subsurface Damage Threshold of Nd-Doped Phosphate Glass

Study on the laser-induced damage characteristics and structure changes of fluorotellurite glass under femtosecond pulsed laser irradiation

Fluorescence and Raman spectra on surface of K9 glass by high fluence ultraviolet laser irradiation at 355 nm

Damage characteristics of 193 nm laser irradiated on MgF2 window

Experimental Investigation on Laser-Induced Surface Damage Threshold of Nd-Doped Phosphate Glass

Influence of the high-repetition-pulsed laser beam size on the damage characteristics of absorbing glass

Laser-induced damage growth of large-aperture fused silica optics under high-fluence 351 nm laser irradiation

Laser-Induced Damage Growth on Larger-Aperture Fused Silica Optical Components at 351 Nm

Laser-induced Damage Growth of Fused Silica at 351 Nm on a Large-Aperture High-Power Laser Facility

Laser-induced damage and defect analysis of calcium fluoride window caused by the high pulse repetition rate of ArF excimer laser radiation

Experimental and Computational Study of Damage Pocess Induced by 1064 Nm Nanosecond Laser Pulse on the Exit Surface of Fused Silica