Abstract:To comprehensively reveal the influence regularity of different glass melting temperatures on the ultraviolet (UV) laser-induced damage resistance of fluoride-containing phosphate glasses, the initial bulk damage, damaged growth, and dynamic behaviors of both fundamental-frequency (1ω) absorptive and third-harmonic-frequency (3ω) transparent fluoride-containing phosphate glasses are explored utilizing the time-resolved pump–probe shadowgraph technique. A low-temperature (1000 °C) glass melting process resulted in an increase in the absorption coefficient at 355 nm and decrease in the optical bandgap for the 1ω absorptive glass. The produced 1ω absorptive glass was subjected to higher shock pressure and shock temperature on the rear surface after a single-pulse laser irradiation, and had a more serious filamentation damage accompanied by a funnel-shape morphology. With the subsequent multiples irradiation, the initial bulk damage area increased exponentially with a growth coefficient of 0.72. The corresponding exponential growth coefficient for the counterpart 1ω absorptive glass melted at a high temperature (1200 °C) was only 0.32 due to its slight initial bulk damage. In contrast, for the 3ω transparent glass, the high-temperature (1200 °C) melting process led to a larger initial bulk damage area and largest exponential growth coefficient of 0.91, 1.1 times that of the 3ω transparent glass melted at a low temperature (1000 °C). They exhibited wave-packed damaged morphologies extending from the rear surface into the glass body. The melting temperatures exhibited the opposite influence regularity for these two investigated fluoride-containing phosphate glasses. The high-temperature (1200 °C) melting process favored the improvement in UV laser-induced damage resistance of the 1ω absorptive glass, as evidenced by the higher UV laser-induced damage threshold and lower damage growth coefficient, while the low-temperature (1000 °C) melting process exerted similar effects on the 3ω transparent glass.

Study on the laser-induced damage characteristics and structure changes of fluorotellurite glass under femtosecond pulsed laser irradiation

Mid-infrared femtosecond laser-induced damage in TeO<sub>2</sub>-BaF<sub>2</sub>-Y<sub>2</sub>O<sub>3</sub> fluorotellurite glass

Femtosecond laser induced microstructure and luminescence changes in oxyfluoride tellurite glasses

Femtosecond laser-induced damage characteristics of mid-infrared oxyfluorogallate glass

Femtosecond Laser-Induced Damage on the End Surface of Double-Cladding Fluorotellurite Fiber

Laser Damage Threshold of Telluride Transmitting Infrared Fluoroaluminate Glass

The Damage Property of Oxyfluoride Glasses Irradiated by a 351 Nm High Fluence Laser

Femtosecond Laser-Induced Refractive Index Change and Phase-Type Fresnel Zone Plate in Fluorotellurite Glass

Preparation Of The Oxyfluoride Glass With High 3 Omega Laser Induced Damage Threshold

Thermodynamic damage behavior of single-crystal MgF2 irradiated by high-power fiber laser

Space-Selective Modification of Glass by Using Femtosecond Laser

On Laser-Induced Damage Features in an Ultraviolet (uv) Fluorophosphate Glass when Irradiated with A Nanosecond Laser Beam

High concentration Tm3+ doped TeO2-Al2O3-BaF2 glass for ~ 2 μm fiber lasers

Laser-induced fluorescence and its effect on the damage resistance of fluoride-containing phosphate-based glasses

Bulk damage growth characteristics and ultrafast diagnosis of fluoride-containing phosphate glasses induced by 355-nm laser

Effect of BaF2 and Y2O3 on the Raman Scattering Characteristics of Fluorotellurite Glasses

Microstructures Induced by Femtosecond Laser Pulses Inside Glasses

Ultraviolet-infrared Femtosecond Laser-Induced Damage in Fused Silica Andcaf2crystals

Recent Research Progress on Femtosecond Laser Induced Microstructures in Glasses

Progress on Novel Mid-Infrared Glass Fibers and Relative Lasers

Laser-induced damage threshold based on thermal effects in high-purity silica optical fiber