Abstract:To comprehensively reveal the influence regularity of different glass melting temperatures on the ultraviolet (UV) laser-induced damage resistance of fluoride-containing phosphate glasses, the initial bulk damage, damaged growth, and dynamic behaviors of both fundamental-frequency (1ω) absorptive and third-harmonic-frequency (3ω) transparent fluoride-containing phosphate glasses are explored utilizing the time-resolved pump–probe shadowgraph technique. A low-temperature (1000 °C) glass melting process resulted in an increase in the absorption coefficient at 355 nm and decrease in the optical bandgap for the 1ω absorptive glass. The produced 1ω absorptive glass was subjected to higher shock pressure and shock temperature on the rear surface after a single-pulse laser irradiation, and had a more serious filamentation damage accompanied by a funnel-shape morphology. With the subsequent multiples irradiation, the initial bulk damage area increased exponentially with a growth coefficient of 0.72. The corresponding exponential growth coefficient for the counterpart 1ω absorptive glass melted at a high temperature (1200 °C) was only 0.32 due to its slight initial bulk damage. In contrast, for the 3ω transparent glass, the high-temperature (1200 °C) melting process led to a larger initial bulk damage area and largest exponential growth coefficient of 0.91, 1.1 times that of the 3ω transparent glass melted at a low temperature (1000 °C). They exhibited wave-packed damaged morphologies extending from the rear surface into the glass body. The melting temperatures exhibited the opposite influence regularity for these two investigated fluoride-containing phosphate glasses. The high-temperature (1200 °C) melting process favored the improvement in UV laser-induced damage resistance of the 1ω absorptive glass, as evidenced by the higher UV laser-induced damage threshold and lower damage growth coefficient, while the low-temperature (1000 °C) melting process exerted similar effects on the 3ω transparent glass.

Laser Damage Threshold of Telluride Transmitting Infrared Fluoroaluminate Glass

Mid-infrared femtosecond laser-induced damage in TeO<sub>2</sub>-BaF<sub>2</sub>-Y<sub>2</sub>O<sub>3</sub> fluorotellurite glass

The Damage Property of Oxyfluoride Glasses Irradiated by a 351 Nm High Fluence Laser

Study on the laser-induced damage characteristics and structure changes of fluorotellurite glass under femtosecond pulsed laser irradiation

Preparation Of The Oxyfluoride Glass With High 3 Omega Laser Induced Damage Threshold

Femtosecond laser-induced damage characteristics of mid-infrared oxyfluorogallate glass

Comparison Of Fused Silica And Oxyfluoride Glass On Laser Induced Initial Damage Morphology

Bulk damage growth characteristics and ultrafast diagnosis of fluoride-containing phosphate glasses induced by 355-nm laser

Femtosecond laser induced microstructure and luminescence changes in oxyfluoride tellurite glasses

On Laser-Induced Damage Features in an Ultraviolet (uv) Fluorophosphate Glass when Irradiated with A Nanosecond Laser Beam

Femtosecond Laser-Induced Damage on the End Surface of Double-Cladding Fluorotellurite Fiber

Laser-induced fluorescence and its effect on the damage resistance of fluoride-containing phosphate-based glasses

Effects of Al2O3 on the Thermal Stability, Glass Configuration of Yb3+-doped TeO2–K2O–ZnO–Al2O3 Based Tellurite Laser Glasses

Unusual Thermal Response of Tellurium Near-Infrared Luminescence in Phosphate Laser Glass.

Impacts of hydroxyl and bond energy on laser‐induced damage in mid‐infrared chalcogenide glass

Study on the Structure, Mechanical Properties, and 2-Μm Fluorescence of Ho3+-doped Transparent TeO2-based Glass–ceramics

CHEMICAL STABILITY OF NEW OXYFLUORIDE GLASSES

Effect of F− Ions on Physical and Spectroscopic Properties of Yb3+-doped TeO2-based Glasses

Thermodynamic damage behavior of single-crystal MgF2 irradiated by high-power fiber laser

Enhanced 2.7 Mu M Emission From Er3+ Doped Oxyfluoride Tellurite Glasses For A Diode-Pump Mid-Infrared Laser

Effect of WO_3 Content and Removing Water Process on the 1.8 Μm Emission in the Tm~(3+) Doped Tellurite Glass