Abstract:To comprehensively reveal the influence regularity of different glass melting temperatures on the ultraviolet (UV) laser-induced damage resistance of fluoride-containing phosphate glasses, the initial bulk damage, damaged growth, and dynamic behaviors of both fundamental-frequency (1ω) absorptive and third-harmonic-frequency (3ω) transparent fluoride-containing phosphate glasses are explored utilizing the time-resolved pump–probe shadowgraph technique. A low-temperature (1000 °C) glass melting process resulted in an increase in the absorption coefficient at 355 nm and decrease in the optical bandgap for the 1ω absorptive glass. The produced 1ω absorptive glass was subjected to higher shock pressure and shock temperature on the rear surface after a single-pulse laser irradiation, and had a more serious filamentation damage accompanied by a funnel-shape morphology. With the subsequent multiples irradiation, the initial bulk damage area increased exponentially with a growth coefficient of 0.72. The corresponding exponential growth coefficient for the counterpart 1ω absorptive glass melted at a high temperature (1200 °C) was only 0.32 due to its slight initial bulk damage. In contrast, for the 3ω transparent glass, the high-temperature (1200 °C) melting process led to a larger initial bulk damage area and largest exponential growth coefficient of 0.91, 1.1 times that of the 3ω transparent glass melted at a low temperature (1000 °C). They exhibited wave-packed damaged morphologies extending from the rear surface into the glass body. The melting temperatures exhibited the opposite influence regularity for these two investigated fluoride-containing phosphate glasses. The high-temperature (1200 °C) melting process favored the improvement in UV laser-induced damage resistance of the 1ω absorptive glass, as evidenced by the higher UV laser-induced damage threshold and lower damage growth coefficient, while the low-temperature (1000 °C) melting process exerted similar effects on the 3ω transparent glass.

Water Corrosion of Commercial Neodymium-Doped Phosphate High-Peak-power Laser Glass

Study on surface modification and optical properties of Nd-doped phosphate glass

Research and Development of Neodymium Phosphate Laser Glass for High Power Laser Application

Experimental Investigation of Enhancing the Subsurface Damage Threshold of Nd-Doped Phosphate Glass

Experimental Investigation on Laser-Induced Surface Damage Threshold of Nd-Doped Phosphate Glass

Large aperture N31 neodymium phosphate laser glass for use in a high power laser facility

Influence of Mixed Na2O/K2O on Chemical Durability and Spectral Properties of P2O5-Al2O3-BaO-K2O-Na2O-Nd2O3 Phosphate Glasses

(INVITED) Impurities in Large Scale Produced Nd-doped Phosphate Laser Glasses. I. Cu Ions

Optical and Thermal Properties of A New Nd-Doped Phosphate Laser Glass

Mechanism for Broadening and Enhancing Nd3+ Emission in Zinc Aluminophosphate Laser Glass by Addition of Bi2O3

Optimized monolithic edge-cladding glass for N31-type Nd-doped high power laser glass

Effect of Acid Etching on Properties of Phosphate Laser Glass

Assessment of the Thermal Shock Resistance of Neodymium Doped Alumino-Phosphate Laser Glasses

Bulk damage growth characteristics and ultrafast diagnosis of fluoride-containing phosphate glasses induced by 355-nm laser

Distribution of Electric Field and Energy Flux Around the Cracks on the Surfaces of Nd-doped Phosphate Glasses.

Study on thermal stability and spectroscopic properties of Nd3+-doped phosphate laser glasses

Surface treatment of P2O5-BaO-Al2 O3-K2O phosphate laser glass

Study on the Laser-Induced Darkening in Nd-Doped Laser Glasses

Impact of the aqueous corrosion induced alteration layer on mechanical properties of pharmaceutical glasses

Laser-induced damage properties of antireflective porous glasses

Improvement For The Surface Damage Resistance Of Nd-Doped Phosphate Glass