Abstract:Laser-induced damage of fused silica optics at 351 nm is a key factor limiting the output energy of high-power laser facility, especially the damage growth process. A comprehensive understanding of its damage growth behavior is of critical importance for high-power laser facility. Thus we study the laser-induced damage growth on the exit surface of fused silica under the subsequent illumination of 5 ns square pulses at 351 nm on a large-aperture high-power laser facility. Experiment is conducted with a 36 cm thick UV grade fused silica focus lens in clean atmosphere and at room temperature. 56 laser shots of 3 fluence in a range from 0.1 J/cm2 to 8.1 J/cm2 are fired during the experiment. And the damage initiation process and growth process are monitored and recorded with an online optics damage inspection instrument which has an optical resolution of about 50 m. Experimental results demonstrate that the sizes of exit-surface damage sites exponentially or linearly grow with laser shots and the damage growth rate increases with laser fluence. However, it is found that even under the same laser conditions the damage grow rate is not a fixed value, which means that besides the laser fluence other parameters also influence the damage grow process. In order to highlight some tendencies, we consider the single-shot damage growth rate and calculate the average of inside fluence bins. Statistical analysis shows that smaller sites tend to grow with larger growth rates than larger sites under the irradiation of the same laser fluence. This result indicates that damage growth rate is influenced by both laser fluence and damage site size. It suggests that the damage growth rule needs to be incorporated into a size-dependent growth effect. The result that higher growth rates are obtained for small damage sites may be related to the damage growth mechanism of fused silica. Damage crater of fused silica consists of a central core and numerous surrounding cracks. The defects in the central core absorb laser energy and yield plasma, then the plasma pressure will open the cracks on the periphery of the crater and lead to lateral and axial expansion of cracks which can be identified as damage growth. The fact that smaller sites grow faster than larger sites implies that smaller sites more efficiently couple laser energy into fracture energy. Our results have important implications for both the prediction of fused silica optics lifetime and the fundamental understanding of laser damage mechanism.

Reduced threshold ultraviolet laser ablation of glass substrates with surface particle coverage: A mechanism for systematic surface laser damage

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Revealing Subsurface Damage Morphology and Patterns in areal Ultrashort Pulse Laser Machining of Glass

Experimental Investigation on Laser-Induced Surface Damage Threshold of Nd-Doped Phosphate Glass

Damage Behaviors of Silica Microparticles on Fused Silica Optics under 355 Nm High Fluence Laser

Experimental Investigation of Enhancing the Subsurface Damage Threshold of Nd-Doped Phosphate Glass

Investigation of the Multimechanism Laser Cleaning Dynamics for Rough Fused Silica Surfaces with Organic Contaminants: A Computational Simulation and Atomic Analysis.

Investigation on Hybrid Laser Ablation and Its Application in Fused Silica Damage Mitigation.

Damage morphology and mechanism in ablation cutting of thin glass sheets with picosecond pulsed lasers

Laser Induced Damage of Optical Elements–a Status Report

Damage Morphologies of Al2O3 and Fe Particles Attached on the Input Surface of Fused Silica after Irradiation by a 355 Nm Laser.

Laser Cleaning of Particulate Contaminants on K9 Glass Surface

Laser-Induced-Plasma-Assisted Ablation for Glass Microfabrication

Analysis and Experimental Investigation of Laser Induced Damage of Optics

Surface damage induced by micropores in transparent ceramics under nanosecond laser irradiation

Laser damage of optical windows with random antireflective surface structures on both interfaces

Laser damage of silica optical windows with random antireflective structured surfaces

Characterization of artificial indentation defects in fused silica surface and its damage performance under 355 nm nanosecond laser

Study of Laser-Irradiated Thin Films

Laser-Induced Damage Growth on Larger-Aperture Fused Silica Optical Components at 351 Nm

Laser-induced Damage Growth of Fused Silica at 351 Nm on a Large-Aperture High-Power Laser Facility