Study of structural and dielectric properties of Ba0.6Sr 0.4(ZrXTi1-X)O3 ceramic
Xilin Wang,Yuzhen Zhao,Shanshan Liu,Heping Zhou
DOI: https://doi.org/10.4028/www.scientific.net/MSF.687.402
2011-01-01
Materials Science Forum
Abstract:BaxSr1-xTiO3 [(BST), 0 <= x <= 1] is a solid solution ferroelectric material exhibiting a large dielectric constant non-linear change with an applied DC electric field. And Ba(ZrxTi1-x)O-3 solid solution also has received much attention because of the good tunbality. In this paper, Ba0.6Sr0.4(ZrxTi1-x)O-3 (x=0.15,0.20,0.25,0.30,) ceramic was obtained by traditional ceramic processing. The structural, surface morphological, dielectric properties, tunable properties of this material as well as the mechanism of their nonlinear dielectric constant under DC electric field were systematically examined. The Zr ions substitution of Ti ions has a strong effect on the grain sizes and the dielectric property. The results show that Ba0.6Sr0.4(ZrxTi1-x)O-3 (x = 0.2, 0.25,0.3) ceramic is a promising candidate for the DC electric field tunable materials for microwave electronics application, because they exhibit high relative tunability (44%, 48%, 35%, respectively) as the strength of electric field is up to 1.5 kV/mm, and low dielectric loss (0.0026, 0.00044, 0.0015, respectively) at 100 kHz at room temperature. X-ray diffraction analyses indicated that the samples present perovskite phase. Scanning electron microscopy micrograph of sample indicated that the grain size decreased and density increased with Zr concentration increasing.