Abstract:Low costly ferritic stainless steels, especially the Cr2O3-forming alloys, are promising interconnect materials for solid oxide fuel cells (SOFCs) due to their thermal expansion compatibility with other cell components. However, the oxidation resistance of commercial ferritic stainless steels in the operating temperature range of 600-800 degrees C is not adequate, forming relatively thick, poorly conducting oxide scale on the surface of the stainless steel interconnect and decreasing the cell performance. Surface modification is necessary to improve the oxidation behavior and electrical property. The present study investigates the effect of a LaCoO3 protective coating by the sol-gel process on the intermediate temperature oxidation behavior of SUS 430 alloy, which is frequently considered as the interconnect material for SOFCs. X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used to characterize the phase structure, surface morphology and composition of the coating and the oxide scale. The "4-probe" method was employed to determine the area specific resistance (ASR) of the surface oxides. Long-term thermally cyclic oxidation at 750 degrees C in air has shown that the oxidation kinetics obeys the parabolic rule with a rate constant of K=4.18x10(-15) g(2)/(cm(4).s), which is 1-2 orders of magnitude lower than that of the uncoated alloy, the LaCoO3 protective coating effectively suppresses the formation of Cr2O3 and slows down the growth of MnCr2O4 spinel. As a result, the oxidation resistance and electrical conductivity of the coated SUS 430 alloy are significantly enhanced, resulting in an ASR at 750 degrees C of only 3.13 m Omega.cm(2) after oxidation at 750 degrees C for 850 h in air and an extrapolated ASR of 21.5 m Omega.cm(2) for 4 x 10(4) h oxidation.

Oxidation and Electrical Behaviors of Metallic Interconnect in IT-SOFC Cathode Environment

Oxidation of SUS430 Alloy Interconnector in Simulated SOFC Anode Atmosphere

Effect of Lacoo3 Coating on the Intermediate Temperature Oxidation Behavior of Sus 430 Metallic Interconnect

Investigation of Anomalous Oxidation Behavior of SUS430 Alloy in Solid Oxide Fuel Cell Dual Atmosphere

High Temperature Oxidation Behavior of SUS430 SOFC Interconnects with Mn-Co Spinel Coating in Air

The electrical property of MnCo2O4 and its application for SUS 430 metallic interconnect

Unravelling the oxidation behaviors of porous stainless steel 430L substrate for metal-supported solid oxide fuel cells

Oxidation behavior of metallic interconnect in solid oxide fuel cell stack

Development of Novel Interconnect Materials for Intermediate Temperature Solid Oxide Fuel Cell

The suitability performance of Sr2Fe1.5Mo0.5O6-δ-coated SUS430 for SOFC interconnect application

Oxidation of MnCu0.5Co1.5O4 Spinel Coated SUS430 Alloy Interconnect in Anode and Cathode Atmospheres for Intermediate Temperature Solid Oxide Fuel Cell

The effect of surface treatment on the oxidation of ferritic stainless steels used for solid oxide fuel cell interconnects

An investigation of Cr vaporization from SUS430 metallic interconnect and deposition on (La,Sr)MnO 3 cathode of intermediate temperature solid oxide fuel cells

Oxidation and electrical behavior of Ni-Mn3O4-La2O3-coated SOFC interconnect steel

Characterization of the conductive protection layers on alloy interconnect for SOFC

Oxidation behavior and interface diffusion of porous metal supported SOFCs with all plasma sprayed functional layers in air at 65OoC

Cyclic oxidation of Mn–Co spinel coated SUS 430 alloy in the cathodic atmosphere of solid oxide fuel cells

Oxidation and electrical behavior of AISI 430 steel coated with Ni–P–TiO2–ZrO2 composite for SOFC interconnect application

Effects of the nickel-coated ferritic stainless steel for solid oxide fuel cells interconnects

Supersonic spray derived Cu–Co oxide coating on SUS441 to protect the metallic interconnect and to increase stability of SOFC cathode

Oxidation Kinetics and Phase Evolution of a Fe–16Cr Alloy in Simulated SOFC Cathode Atmosphere