Abstract:To enhance the comprehensive performance of solid oxide fuel cells (SOFCs) ferritic stainless steel (FSS) interconnectors, a novel approach involving composite electrodeposition and thermal conversion is proposed to prepare Ni-doped Co-Mn composite spinel protective coatings on FSS surfaces. The process involves the composite electrodeposition of a Ni-doped Co-Mn precursor coating, followed by thermal conversion to obtain the Co-Mn-Ni composite spinel coating. Crofer 22H was used as the substrate and orthogonal experiments were designed to investigate the influences of deposition solution pH, stirring rate, cathode current density, and the element content of Mn and Ni on the surface morphology and properties of the composite coatings, respectively. The characterization of the prepared coatings was conducted through macroscopic and microscopic morphology observations of the component surface, energy dispersive spectroscopy (EDS) analysis, and area specific resistance (ASR) testing, etc. Finally, the optimized composite electrodeposition parameters and the Mn-Ni content ratio in the solution were obtained. Experimental results indicated that the composite spinel coating prepared with the optimized process parameters exhibited excellent adhesion to the substrate, and the diffusion and migration of Cr element has been effectively inhibited. Compared with the substrate, the ASR of the coated components has also been decreased simultaneously, which provided an effective method for the surface modification of SOFC FSS interconnectors.

Research Progresses in the Preparation of Spinel Coatings on the Surface of SOFC Ferrite Stainless Steel Interconnectors

Cu doped Mn-Co spinel protective coating on ferritic stainless steels for SOFC interconnect applications

Protective/Conductive Coatings on Ferritic Stainless Steels for Solid Oxide Fuel Cell Interconnect Applications

Thermal Growth and Performance of Manganese Cobaltite Spinel Protection Layers on Ferritic Stainless Steel SOFC Interconnects

Review—(Mn,Co)3O4-Based Spinels for SOFC Interconnect Coating Application

Progress of Interconnect Materials Used for SOFC

Influences of Composite Electrodeposition Parameters on the Properties of Ni-Doped Co-Mn Composite Spinel Coatings

The electrical property of MnCo2O4 and its application for SUS 430 metallic interconnect

High-entropy FeCoNiMnCu alloy coating on ferritic stainless steel for solid oxide fuel cell interconnects

Progress in SOFC Metallic Interconnect Coating

Ferritic Steel Interconnect Used in Solid Oxide Fuel Cell

Effect of Rare Earth Y and Metal X (Co, Mn, Ni, Cu) Elements on Cr Diffusion Behavior of SOFC Metallic Interconnect

Highly dense (Mn,Co)3O4 spinel protective coating derived from Mn–Co metal precursors for SOFC interconnect applications

Mechanical reliability and life prediction of coated metallic interconnects within solid oxide fuel cells

Metallic Interconnect Materials Used in Solid Oxide Fuel Cell

Supersonic spray derived Cu–Co oxide coating on SUS441 to protect the metallic interconnect and to increase stability of SOFC cathode

Development and Application of HVOF Sprayed Spinel Protective Coating for SOFC Interconnects

Perovskite Conversion Coatings as Novel and Simple Approach for Improving Functional Performance of Ferritic Stainless Steel SOFC Interconnects

Protective coatings for Cr2O3-forming interconnects of solid oxide fuel cells

Performance and In-Situ Densification of Mn-Co Spinel Coating on SUS430/441 Interconnect by Spraying Method

High Temperature Oxidation Behavior of SUS430 SOFC Interconnects with Mn-Co Spinel Coating in Air