Abstract:A solid oxide fuel cell (SOFC) stack requires metallic interconnects to electrically connect unit cells, while preventing fuel from mixing with oxidant. During SOFC operations, chromia scales continue to grow on the interconnect surfaces, resulting in a considerable increase of interfacial resistance, and at the same time, gaseous Cr species released from the chromia scales degrades the cathode performance. To address these problems, in this study, protective Mn2CuO4 coatings are fabricated on metallic interconnects (Crofer 22 APU) via a plasma spray (PS) process. The PS technique involves direct spray deposition of molten Mn2CuO4 onto the interconnect substrate and leads to the formation of high-density Mn2CuO4 coatings without the need for post-heat-treatment. The thickness, morphology, and porosity of the PS-Mn2CuO4 coating are found to depend on the processing parameters, including plasma arc power, gas flow rate, and substrate temperature. The PS-Mn2CuO4 coating fabricated with optimized parameters is completely impermeable to gases and has high adhesion strength on the interconnect substrate. Furthermore, no resistive chromia scales are formed at the coating/substrate interface during the PS process. As a result, the PS-Mn2CuO4-coated interconnects show a very low area-specific resistance below 10 mΩ cm2 at 800 °C in air and excellent stability during both continuous operation and repeated thermal cycling. This work suggests that an appropriate combination of the material and coating process provides a highly effective protective layer for SOFC interconnects.

Progress in SOFC Metallic Interconnect Coating

Perspectives on the metallic interconnects for solid oxide fuel cells

Supersonic spray derived Cu–Co oxide coating on SUS441 to protect the metallic interconnect and to increase stability of SOFC cathode

Development and Application of HVOF Sprayed Spinel Protective Coating for SOFC Interconnects

Development of Coating Materials on Alloy Interconnect in Solid Oxide Fuel Cell

High-entropy FeCoNiMnCu alloy coating on ferritic stainless steel for solid oxide fuel cell interconnects

Ni–Co/ZrO2 Composite Coatings via Electroless Plating on Crofer 22APU for SOFC Interconnect Applications: Oxidation and Chromium Vaporization Behavior

Protective/Conductive Coatings on Ferritic Stainless Steels for Solid Oxide Fuel Cell Interconnect Applications

Research Progresses in the Preparation of Spinel Coatings on the Surface of SOFC Ferrite Stainless Steel Interconnectors

Protective coatings for Cr2O3-forming interconnects of solid oxide fuel cells

Protective coating based on manganese–copper oxide for solid oxide fuel cell interconnects: Plasma spray coating and performance evaluation

Characterization of La0.8Sr0.2Co0.5Mn0.5O3-δ Coating on Alloy Interconnect in SOFC

Cu doped Mn-Co spinel protective coating on ferritic stainless steels for SOFC interconnect applications

Performance of stainless steel interconnects with (Mn,Co)3O4-Based coating for solid oxide electrolysis

The electrical property of MnCo2O4 and its application for SUS 430 metallic interconnect

Review—(Mn,Co)3O4-Based Spinels for SOFC Interconnect Coating Application

Metallic Interconnect Materials Used in Solid Oxide Fuel Cell

High Temperature Oxidation Behavior of SUS430 SOFC Interconnects with Mn-Co Spinel Coating in Air

Plasma spray coating on interconnector toward promoted solid oxide fuel cells and solid oxide electrolysis cells

Effect of Rare Earth Y and Metal X (Co, Mn, Ni, Cu) Elements on Cr Diffusion Behavior of SOFC Metallic Interconnect

Progress of Interconnect Materials Used for SOFC