Abstract:The capacity of the electric grid in China is undergoing rapid expansion to keep pace with the fast economic growth. The annual gross production of the UHV products exceeded 100 billion RMB (approximately 12 billion Euro). Therefore the design and optimization technology for UHV SF6 gas circuit breakers are very demanding. Based on the two-dimensional magneto-hydrodynamic (MHD) model and a commercial CFD (computational fluid dynamics) software, FLUENT, a computer simulation tool for the design and optimization for UHV SF6 gas circuit breaker is established. Nozzle ablation effect is considered by introducing an independent mass conservation equation for the ablated material to the overall conservation equations of mass, momentum, and energy. The ohmic heating and the radiation of the electric arc are considered in the model by adding relevant source terms. Both the thermal interruption capability and the dielectric interruption capability can be numerically predicted. To predict the thermal interruption capability, the arc conductance 200ns before current zero is used as an indicator. The CFD model is applied for the high current arcing phase, and Mayr arc model is used near the current zero period. To predict the dielectric interruption, both the reduced electric field strength and the reduced critical electric filed strength everywhere inside the interrupter are computed and compared, to judge the occurrence of the electric breakdown. The validity of the present simulation model is verified by comparison of the simulation results with the experimental results such as voltage, currents of the arc and pressure rises Type here the email address of the main author as a footnote. inside the interrupter during the arc interruption. The numerical prediction by the simulation tool is verified by the direct interrupting test of 550kV GCB, too. The developed computer simulation tool was applied in the design of a 550kV GCB. Significant benefits have been achieved in terms of both the cost saving and shorten of the development cycle. The paper is organized as follows: the governing equations of the simulation model based on the 2-dimensional MHD model are presented in section 2. The numerical prediction of the thermal interruption capability of the SF6 GCB is described in section 3. The numerical prediction of the dielectric interruption capability of the SF6 GCB is described in section 4. In section 5 the experimental set-ups as well as the experimental results are presented and compared with the simulated ones. The numerical predictions agree well with the experiments. Finally conclusion is drawn in section 6.

Electrical Insulation Design and Numerical Simulation Analysis of 1 MV Compact Repetitive Marx Generator

Electrical Endurance Design of Multi-Operation Isolators Using Semi-Physical Simulation Via Algebraic Multigrid Iteration

Insulation Design for a 1.2 MV Enclosed Marx Generator

Simulation Study of External Coil on Discharge Characteristics of Liquid Nitrogen Switch under Multi-Electrode Conditions

Computation of Transient Electromagnetic Field Emission from Enclosure During GIS Disconnector Switching Operations

500Kv Compact Repetitive Marx Generator

Design and Performance of a Compact Marx Generator for Two-Electrode Gas Switch Used in ICF Power Conditioning System

Three-Dimensional Modeling and Optimization Analysis of Internal Electric Field in 40.5 Kv Switchgear

Study on Internal Electric Field Simulation Analysis and Local Optimization Strategies of High Voltage Metal Enclosed Switchgear

Electric field calculation and shield optimization for 1000kV GIS bushing

Analysis and Optimization of Electric Field Distribution in 1200kv SF6 Insulated Power Frequency Test Transformer

Insulation Design And Analysis On High Voltage Vacuum Interrupter

Simulation of Internal Electric Field of High-voltage Metal-enclosed Switchgear and Influencing Factors

Computer simulation tool for the design and optimation for UHV SF6 circuit breakers

Modeling and Design of Insulation Structure for High Power Density Medium Voltage High-Frequency Transformers

Numerical Study on Transient Behaviours of a 30-kW Generator Using a Coupling Method

Simulation and optimization of structure parameters in 550kV disconnectors based on Response Surface Method

Evaluation and optimization of electric field on a high-voltage switchgear in nuclear power station

Electric Field Optimization for Enhanced Insulation in 10kv SiC MOSFET Power Modules Based on Chipwall Integration

Simulation and Optimization Design of Isolating Switch in the Indoor DC Yard of ±1100kv Converter Station

Simulation and Motion Analysis of Spherical Free Conducting Particle Between Coaxial Electrodes