Abstract:High voltage pulse transformers have an essential role in pulsed power systems and power conversion applications. Improving the electromagnetic behavior of such devices leads to better efficiency and low-level electromagnetic interference (EMI) noise propagation in systems. In this paper, a high voltage pulsed power system is considered and analyzed to improve their electromagnetic compatibility (EMC). The new generation of pulsed power systems that use SiC and GaN fast switches in capacitor charger power electronic circuits, face far more EMI challenges. Moreover, in this paper, the EMI propagation paths in the pulsed power system are realized and analyzed. The EMI noise level of the system is obtained and compared to the IEC61800-3 standard. To improve the EMC, the parasitic parameters of the transformer, as the main path of EMI circulation, are optimized to block the EMI propagation in the pulsed power system. To achieve this result, the parasitics are modeled and calculated with a novel and accurate energy distribution model. Then, by defining a cost function, the geometry structure of the transformer is optimized to lower the parasitics in the system. Three pareto-optimal techniques are investigated for the cost function optimization. The models and results are verified by the 3D-finite element method (FEM) and experimental results for several given scenarios. FEM and experimental verifications of this model, make the model suitable for any desirable design in any pulsed power system. Finally, the EMI noise level of the system after optimization is shown and compared to the IEC61800-3 standard.

Evaluation of insulation systems for the optimal design of high voltage pulse transformers

Design of Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

Research on AC and High Frequency Breakdown Characteristics of Oil-paper Insulation of 220 Kv Current Transformers

Design of a High-Voltage-Insulation and High-Efficiency Medium Frequency Transformer

Design and Testing of a Medium Frequency Transformer

Research on Deterioration Mechanism of Oil-paper Insulation of 220 Kv Current Transformer

Research on Transient Electric Field Distribution of High-Frequency Transformers Based on COMSOL and SIMULINK Co-simulation

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Comparative Analysis and Evaluation of High Voltage Power Generation Architectures

Modeling and Design of Insulation Structure for High Power Density Medium Voltage High-Frequency Transformers

Design and Optimization of the Insulation of Medium-voltage Medium-frequency Transformers for Solid-state Transformers

Electrical Insulation Design and Numerical Simulation Analysis of 1 MV Compact Repetitive Marx Generator

Insulation structure design and electric field simulation of 500 kV isolation energy supply transformer for HVDC breaker

Optimization of Medium-Frequency Transformers with Large Capacity and High Insulation Requirement

EMC improvement for high voltage pulse transformers by pareto-optimal design of geometry structure based on parasitic analysis and EMI propagation

Design of a high‐frequency transformer based on amorphous cut cores for insulation breakdown testing

A Method to design composite insulation structures based on reliability for pulsed power systems

Experimental Evaluation and Comparison of Thermal Conductivity of High-Voltage Insulation Materials for Vacuum Electronic Devices

Design of Medium-Voltage High-Frequency Transformers Based on High-Thermal-Conductivity Insulation Material

Analysis and enhancement of high voltage insulation for planar transformer

Investigation on AC Dielectric and Breakdown Properties of Fluorinert Liquid-Impregnated Insulation Paper