Abstract:An in situ SiC-TiB2 ceramic composites was fabricated by infiltrating the Al-Si alloy melt into pre-sintered porous preforms with different B4C/TiC weight ratios. The phase composition and microstructure of the SiC-TiB2 ceramic composites were analyzed to understand the synthesis mechanism of the composites. TiB2 and SiC were originated from the reaction among B4C, TiC and Al-Si melt. When the B4C/TiC weight ratio was 35:65, the fabricated TiB2-SiC ceramic composites but no byproduct or raw powders displayed the optimal microstructure, and the TiB2 and SiC particles were homogeneously distributed in Al-Si melt. The SiC-TiB2 ceramic composites with the optimal microstructure owned the outstanding integrated mechanical properties: flexural strength of 245 MPa, fracture toughness of 4.32 MPa m1/2 and Vickers hardness of 10.46 GPa. The fracture surface of SiC-TiB2 ceramic composites showed the mixed fracture mode with intergranular and transgranular fracture. The strengthening and toughening mechanisms were investigated from particle reinforcement, pulling out of grains and crack deflection found in the SiC-TiB2 ceramic composites.

Synthesis and properties of AIN-SiC-TiB2 ceramics by SHS-HIP

Synthesis and Properties of AlN-SiC-TiB2 Ceramics by SHS-HIP

Fabrication of AlN-SiC-TiB2 Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing

Mechanical Properties of AlN-SiC Ceramic Composites Synthesized by Pressureless Sintering and Post-HIP Treatment.

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Fabrication of BN-AlN-TiB2 Compound Conductive Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

Microstructure and Mechanical Properties of AlN-TiN-TiB2 Composite Conductive Ceramics

In situ synthesis and mechanical properties of bulk Ti3SiC2/TiC composites by SHS/PHIP

Synthesis of SiC-AIN ceramic alloy by reaction sintering and its HIP-densification

COMBUSTION SYNTHFSIS AND DENSIFICATION BY GAS HOT ISOSTATIC PRESSURE OF AIN- TiB2 CERAMIC WITHOUT ENVELOPE

Enhanced Mechanical/electrical Properties of in Situ Synthesized SiC-TiB2 Ceramic Composites by Reactive Hot-Pressing Sintering

Synthesis of SiC-AlN Powder and Characterization of Its HIP-Sintered Compacts.

Oxidation behavior of AlN–SiC–TiB2 ceramics synthesized by SHS–HIP

Self-propagating high-temperature synthesis of TiC-TiB2 multiphase ceramics

Synthesis and Mechanical Properties of TiB2/Ti2AlN Composites Fabricated by Hot Pressing Sintering

Sintering And Mechanical Properties Of Aln-Rich Ceramics In The Sic-Aln System

Rapid Synthesis of Bulk Ti2alc by Self-Propagating High Temperature Combustion Synthesis with A Pseudo-Hot Isostatic Pressing Process

Self-propagating high temperature combustion synthesis of TiC/TiB2 ceramic–matrix composites

Dense TiC-Al2O3 composites fabricated by SHS

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration