Abstract:By conducting combustion synthesis in high-gravity field, the solidified TiC-TiB2 with a series of TiB2 mole content were prepared through adjusting the mole ratio of C and B elements in combustion system. XRD, FESEM and EDS results showed that with increasing TiB2 mole content, the matrix of TiC-TiB2 composite ceramics transformed a number of fine TiB2 platelets from the TiC spherical grains, and fine-grained even ultrafine-grained microstructures were achieved in solidified TiC-50%TiB2 due to the coupled quasi-eutectic growth under rapid solidification of the ceramic. Properties showed that relative density, Vickers hardness and flexural strength of TiC-50%TiB2 simultaneously reached the maximum values of 98.7%, 21.5 +/- 1.5 GPa and 860 +/- 35 MPa, whereas the maximum fracture toughness of 13.5 +/- 1.5 MPa m(0.5) was achieved in TiC-66.7%TiB2. FESEM fractography analyses of the solidified ceramics indicated that the highest flexural strength achieved in TiC-50%TiB2 benefits from not only the lowest content of Al2O3 inclusions and Cr-W-Ti borides, but also the achievements of fine-grained microstructure in the near-full-density ceramic and high fracture toughness contributed from a intensive coupled mechanism of crack deflection, crack-bridging and pull-out by a large number of fine TiB2 platelets. (C) 2012 Elsevier B.V. All rights reserved.

Self-propagating high-temperature synthesis of TiC-TiB2 multiphase ceramics

Self-propagation High-temperature Synthesis of Porous TiB2-TiC Multiphase Ceramics

Self-propagating high temperature combustion synthesis of TiC/TiB2 ceramic–matrix composites

Synthesis and Properties of AlN-SiC-TiB2 Ceramics by SHS-HIP

Self-propagating high temperature combustion synthesis of TiB/Ti composites

Fabrication of AlN-SiC-TiB2 Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing

Combustion Synthesis of TiB-Ti Cermets

In situ synthesis and mechanical properties of bulk Ti3SiC2/TiC composites by SHS/PHIP

Self-propagating high-temperature synthesis of TiC-TiB2/Cu ceramic-matrix composite

Synthesis and properties of AIN-SiC-TiB2 ceramics by SHS-HIP

Dense TiC-Al2O3 composites fabricated by SHS

Preparation of Ternary Layered Ti3SiC2 Ceramic by SHS/PHIP

Enhanced Mechanical/electrical Properties of in Situ Synthesized SiC-TiB2 Ceramic Composites by Reactive Hot-Pressing Sintering

Influence Of Heat Treatment On The Microstructure And Properties Of Ti2alc By Shs/Phip

Microstructure Transformation and Mechanical Properties of TiC–TiB2 Ceramics Prepared by Combustion Synthesis in High Gravity Field

TiB₂-Based Composites for Ultra-High-Temperature Devices, Fabricated by SHS, Combining Strong and Weak Exothermic Reactions

Synthesis Route and Mechanical Properties of Reactive Hot Pressed TiN–TiB2 Ceramics

Fabrication of BN-AlN-TiB2 Compound Conductive Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing

Effect of TiB2 particles on microstructure and mechanical properties of B4C–TiB2 ceramics prepared by hot pressing

Preparation and Properties of Solidified TiC-TiB2 with Hypoeutectic, Eutectic and Hypereutectic Microstructures

Rapid Synthesis of Bulk Ti2alc by Self-Propagating High Temperature Combustion Synthesis with A Pseudo-Hot Isostatic Pressing Process