Abstract:To increase the energy density of DMFC system, increasing the methanol concentration is an excellent solution. However, the severe methanol crossover problem limits the application of Nafion in DMFCs with a highly concentrated methanol solution. Here, we proposed a feasible approach to overcome this challenge where Nafion membrane was reinforced with a covalently crosslinked quaternized poly (arylene ether ketone) (PAEK) nano fiber mat for establishing acid-base ion-paired interfaces between them. Firstly, the bromomethylated PAEK precursor was prepared into a three-dimensional fibrous support material using electrospinning. The nanofibers were then quaternized and covalently crosslinked to embed in the Nafion matrix while maintaining their fiber morphology. During the membrane fabrication, the ion-paired interfaces were established between the -N(CH3)(3)(+) on the nanofibers and -SO3- groups of Nafion matrix. The strong ion-paired interaction resulted in low membrane swelling and methanol permeability. TEM confirmed that the hydrophilic ionic clusters were aggregated with controllably distribution along the nanofibers to create long-range and efficient proton transport channels. Therefore, the hybrid membrane F-CQPAEK@Nafion-1.0 showed a high proton conductivity of 0.21 S cm(-1) at 80 C. In 2 M DMFC, the maximum power density (PDmax) of this membrane reached 119.38 mW cm(-2), 2.78 times higher than that of recast Nafion. In 10 M DMFC, the PDmax of this hybrid membrane reached 65.31 mW cm(-2), which was 3.54 times higher than that of recast Nafion. The results illustrate the possibility of running Nafion-based hybrid membranes in DMFCs with a broad operational flexibility from low concentration to high concentration methanol solutions.

Structure and performance of composite Nafion® membranes with Pd for DMFC

Structure and Performance of Pd-Nafion® Composite Membranes for DMFC

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Correlations Between Microstructures and Properties of Pd-modified Nafion® Membranes

Pd and Pd-Cu Alloy Deposited Nafion Membranes for Reduction of Methanol Crossover in Direct Methanol Fuel Cells

Microstructure And Composition Of Hybrid Pd-Nafion Membranes

Crosslinked PAEK-based Nanofiber Reinforced Nafion Membrane with Ion-Paired Interfaces Towards High-Concentration DMFC

Modification of Nafion™ membrane to reduce methanol crossover via self-assembled Pd nanoparticles

A Palladium-Alloy Deposited Nafion Membrane for Direct Methanol Fuel Cells

Study on Methanol-Resistant MEA for DMFCs

Modification of Nafion membranes with ternary composite materials for direct methanol fuel cells

Nafion based semi-interpenetrating polymer network membranes from a cross-linkable SPAEK and a fluorinated epoxy resin for DMFCs

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Improvement of the Nafion–polytetrafluoroethylene Membranes for Potential Direct Methanol Fuel Cell Use by Reduction of the Methanol Crossover

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Novel modification of Nafion®117 for a MEMS-based micro direct methanol fuel cell (μDMFC)

Study on the preparation and properties of PVDF-blend-Nafion membranes

Self-assembling multi-layer Pd nanoparticles onto Nafion™ membrane to reduce methanol crossover

Noble metal nanowires incorporated Nafion® membranes for reduction of methanol crossover in direct methanol fuel cells

A Bi-Functional Polymeric Nano-Sieve Nafion Composite Membrane: Improved Performance for Direct Methanol Fuel Cell Applications

Improved performance of nafion membranes by blending ultra-high molecular weight polyvinylidene fluoride