Abstract:To increase the energy density of DMFC system, increasing the methanol concentration is an excellent solution. However, the severe methanol crossover problem limits the application of Nafion in DMFCs with a highly concentrated methanol solution. Here, we proposed a feasible approach to overcome this challenge where Nafion membrane was reinforced with a covalently crosslinked quaternized poly (arylene ether ketone) (PAEK) nano fiber mat for establishing acid-base ion-paired interfaces between them. Firstly, the bromomethylated PAEK precursor was prepared into a three-dimensional fibrous support material using electrospinning. The nanofibers were then quaternized and covalently crosslinked to embed in the Nafion matrix while maintaining their fiber morphology. During the membrane fabrication, the ion-paired interfaces were established between the -N(CH3)(3)(+) on the nanofibers and -SO3- groups of Nafion matrix. The strong ion-paired interaction resulted in low membrane swelling and methanol permeability. TEM confirmed that the hydrophilic ionic clusters were aggregated with controllably distribution along the nanofibers to create long-range and efficient proton transport channels. Therefore, the hybrid membrane F-CQPAEK@Nafion-1.0 showed a high proton conductivity of 0.21 S cm(-1) at 80 C. In 2 M DMFC, the maximum power density (PDmax) of this membrane reached 119.38 mW cm(-2), 2.78 times higher than that of recast Nafion. In 10 M DMFC, the PDmax of this hybrid membrane reached 65.31 mW cm(-2), which was 3.54 times higher than that of recast Nafion. The results illustrate the possibility of running Nafion-based hybrid membranes in DMFCs with a broad operational flexibility from low concentration to high concentration methanol solutions.

Nafion based semi-interpenetrating polymer network membranes from a cross-linkable SPAEK and a fluorinated epoxy resin for DMFCs

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Crosslinked PAEK-based Nanofiber Reinforced Nafion Membrane with Ion-Paired Interfaces Towards High-Concentration DMFC

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Silane cross-linked network and concentrated flexible sulfoalkyl groups for forming a novel C-SPAEK membrane with enhanced methanol resistance and proton conductivity for DMFC applications

Semi-interpenetrating Polymer Networks Toward Sulfonated Poly(ether Ether Ketone) Membranes for High Concentration Direct Methanol Fuel Cell

Enhancement in proton conductivity and methanol resistance of Nafion membrane induced by blending sulfonated poly(arylene ether ketones) for direct methanol fuel cells

Semi-interpenetrating Polymer Networks Based-on End-Group Crosslinked Fluorine-Containing Polyimide Via Click Chemistry

Blend Membranes Based on Disulfonated Poly(Aryl Ether Ether Ketone)S (speek) and Poly(Amide Imide) (pai) for Direct Methanol Fuel Cell Usages

Crosslinked SPEEK/AMPS Blend Membranes with High Proton Conductivity and Low Methanol Diffusion Coefficient for DMFC Applications

Dimethylamine-tuned guanidinium arylphosphonate iHOFs and superprotonic conduction Nafion hybrid membranes for DMFCs

Synthesis and Characterization of Nafion/cross-linked PVP Semi-Interpenetrating Polymer Network Membrane for Direct Methanol Fuel Cell

Semi-Interpenetrating Polymer Network Membranes from SPEEK and BPPO for High Concentration DMFC

Property Enhancement Effects of Side-Chain-Type Naphthalene-Based Sulfonated Poly(arylene ether ketone) on Nafion Composite Membranes for Direct Methanol Fuel Cells

Click Chemistry‐based Azide‐substituted Polysulfone/alkynyl‐substituted Sulfonated Polyvinyl Alcohol/nafion Blend Membranes for Direct Methanol Fuel Cells

Zwitterion-functionalized nanofiber-based composite proton exchange membranes with superior ionic conductivity and chemical stability for direct methanol fuel cells

SPAEK-based Binary Blends and Ternary Composites As Proton Exchange Membranes for DMFCs

Preparation and Properties of Semi-Ipn Proton Exchange Membranes Based on SPEEK and Cross-Linked PSt-DVB for Direct Methanol Fuel Cells

Polyelectrolyte Membranes Based on Nafion/Chitosan Blends for Direct Methanol Fuel Cell Application

A Bi-Functional Polymeric Nano-Sieve Nafion Composite Membrane: Improved Performance for Direct Methanol Fuel Cell Applications

Proton Exchange Membrane Based on Crosslinked Sulfonated Polyphosphazene Containing Pendent Perfluorosulfonic Acid Groups with Sulfonated Poly(Ether Ether Ketone)