Abstract:Abstract Excessive swelling is one important factor that leads to high fuel permeability and limited operating concentration of methanol for proton exchange membranes. Herein, a collaborative strategy of main‐chain and molecular‐network engineering is applied to lower swelling ratio and improve methanol resistance for highly sulfonated polyimide. Two m ‐phenylenediamine monomers (4‐(2,3,5,6‐tetrafluoro‐4‐vinylphenoxy)benzene‐1,3‐diamine and 4,6‐bis(2,3,5,6‐tetrafluoro‐4‐vinylphenoxy)benzene‐1,3‐diamine) with tetrafluorostyrol groups are designed and synthesized. Two series of cross‐linked sulfonated polyimides (CSPI‐Ts, CSPI‐Bs) are prepared from the two diamines, 4,4′‐diaminostilbene‐2,2′‐disulfonic acid and 1,4,5,8‐naphthalenetetracarboxylicdianhydride. The rigid main‐chain structure is cornerstone for wet CSPI‐Ts and CSPI‐Bs remaining stable at elevated temperatures. The introduction of hydrophobic cross‐linked network further improves their dimensional stability and methanol resistance. CSPI‐Ts and CSPI‐Bs show obviously improved performances containing high proton conductivity (121 ± 0.27–158 ± 0.35 S cm −1 ), low swelling ratio (9.6 ± 0.40%–16.1 ± 0.01%) and methanol permeability (4.14–7.69 × 10 −7 cm 2 s −1 ) at 80 °C. The direct methanol fuel cell (DMFC) is assembled from CSPI‐T‐10 with balanced properties, and it exhibits high maximum power density (PD max ) of 82.3 and 72.6 mW cm −2 in 2 and 10 m methanol solution, respectively. The ratio of PD max in 10 m methanol solution to the value in 2 m methanol solution is as high as 88%. The CSPI‐T‐10 is promising proton exchange membrane candidate for DMFC application.

Synthesis and Characterization of Novel Sulfonated Naphthalenic Polyimides As Proton Conductive Membrane for DMFC Applications

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Preparation of novel naphthalenic sulfonated polyimide proton conductive membrane

Preparation and Characterization of Novel Sulfonated Polyimide Proton Conductive Membrane

Synthesis and Properties of Novel Sulfonated Polyimide Membranes for Direct Methanol Fuel Cell Application

Synthesis and Properties of New Sulfonated Naphthalenic Polyimides As Proton Exchange Membrane for Fuel Cell Applications

Synthesis and Characterization of Novel Sulfonated Polyimide Containing Phthalazinone Moieties As PEM for PEMFC

Synthesis, proton conductivity and methanol permeability of a novel sulfonated polyimide from 3-(2′,4′-diaminophenoxy)propane sulfonic acid

Sulfonated copolyimide membranes derived from a novel diamine monomer with pendant benzimidazole groups for fuel cells

Sulfonated polyimides bearing benzimidazole groups for direct methanol fuel cell applications

Preparation and Evaluation of a Proton Exchange Membrane Based on Oxidation and Water Stable Sulfonated Polyimides

Synthesis and Properties of Sulfonated Copoly(phthalazinone Ether Imides) As Electrolyte Membranes in Fuel Cells

Synthesis and Properties of Novel Sulfonated Polyimides Bearing Sulfophenyl Pendant Groups for Fuel Cell Application

Synthesis and Partial Properties of Naphthalene and Phthalazinone-based Sulfonated Copolyimides for Proton Exchange Membrane in Fuel Cells

Novel Acid–base Polyimides Synthesized from Binaphthalene Dianhydrie and Triphenylamine-Containing Diamine As Proton Exchange Membranes

Blend Membranes Based on Disulfonated Poly(Aryl Ether Ether Ketone)S (speek) and Poly(Amide Imide) (pai) for Direct Methanol Fuel Cell Usages

Synthesis and characterization of sulfonated polyimides for dmfc applications

Sulfonated Polyimide Membranes Constructed by Main‐Chain and Molecular‐Network Engineering Strategy for Direct Methanol Fuel Cell

Preparation and characterization of sulfonated poly(arylene-co-naphthalimide)s for use as proton exchange membranes

Synthesis of Sulfonated Poly(arylene-Co-naphthalimide)s As Novel Polymers for Proton Exchange Membranes

Preparation and Properties of Direct Methanol Fuel Cell Membranes by Embedding Sulfunic Titania into Sulfonated Poly(arylene Ether Nitrile)s