Abstract:The preparation of composite proton exchange membranes (PEMs) by incorporating metal- organic frameworks (MOFs) into polymeric substrates has become a hot research topic in the field of fuel cells in recent years. In this work, ZSC was prepared by in-suit reacted with the precursor of ZIF-8 (Zeolitic Imidazolate Framework 8) and silica coated carbon nanotubes (SiO2@CNTs). The as-prepared ZSC was introduced into sulfonated poly (ether ether ketone) (SPEEK) to fabricate a series of composite proton exchange membranes SPEEK/ZSC-x (where x is the mass percentage between ZSC and SPEEK). The coating treatment of carbon nanotubes (CNTs) by silica not only can avoid the direct contacting among CNTs and enhance the dispersion in SPEEK matrix, but also realize the regulation of nucleation and crystallization process of ZIF-8 particles along the morphology of CNTs. The obtained SPEEK/ZSC composite membranes show improved performance owing to construction of interconnected network architecture and the compositional advantages of the ZSC materials. The proton conductivity of SPEEK/ZSC-0.5 membrane was up to 38.10 mS/cm at 80 °C, which was 1.8 times that of the pure SPEEK membrane (21.12 mS/cm) under the same condition. Moreover, the SPEEK/ZSC-0.5 showed better performance with peak power density of 38.9 mW/cm2 in 2 M methanol solution, which was 1.3 times that of the pure SPEEK membrane of 30.3 mW/cm2, the further stability tests confirmed that the composite film maintained good voltage stability even after 100 h of continuous operation at 80 °C. These results indicate that the strategy of construction MOFs and functional CNTs hybrid materials show promising application prospects in the preparation of high performance PEMs.

Zwitterion-functionalized nanofiber-based composite proton exchange membranes with superior ionic conductivity and chemical stability for direct methanol fuel cells

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

PA-doped nanofiber composite proton exchange membranes with ultrahigh proton conductivity and methanol barrier performance for direct methanol fuel cells

New Proton Exchange Membranes Based on Poly (vinyl Alcohol) for Dmfcs

Highly Proton Conductive and Mechanically Robust SPEEK Composite Membranes Incorporated with Hierarchical Metal–organic Framework/carbon Nanotubes Compound

Composite proton exchange membrane for fuel cells based on chitosan modified by acid-base amphoteric nanoparticles

Modification of sulfonated poly (etherether ketone) composite polymer electrolyte membranes with 2D molybdenum disulfide nanosheet-coated carbon nanotubes for direct methanol fuel cell application

Structural optimization and performance trade-off strategies for semi-crystalline sulfonated poly(arylene ether ketone) membranes in high-concentration direct methanol fuel cells

A Robust Composite Proton Exchange Membrane of Sulfonated Poly (Fluorenyl Ether Ketone) with an Electrospun Polyimide Mat for Direct Methanol Fuel Cells Application

Dimethylamine-tuned guanidinium arylphosphonate iHOFs and superprotonic conduction Nafion hybrid membranes for DMFCs

Crosslinked Hybrid Membranes Based On Sulfonated Poly(Ether Ether Ketone)/Gamma-Methacryloxypropyltrimethoxysilane/Phosphotungstic Acid By An In Situ Sol-Gel Process For Direct Methanol Fuel Cells

Amino-MIL-53(Al)-Nanosheets@Nafion Composite Membranes with Improved Proton/Methanol Selectivity for Passive Direct Methanol Fuel Cells

Phosphoric acid-doped Gemini quaternary ammonium-grafted SPEEK membranes with superhigh proton conductivity and mechanical strength for direct methanol fuel cells

Efficient proton exchange membranes based on bifunctional metal–organic frameworks

Novel sepiolite reinforced emerging composite polymer electrolyte membranes for high-performance direct methanol fuel cells