Abstract:A novel series of sulfonated poly(ether ether ketone ketone)s (SPEEKKs) with different degrees of sulfonation (Ds) were synthesized from 1,3-bis(3-sodium sulfonate-4-fluorobenzoyl)benzene (1,3-SFBB-Na), 1,3-bis(4-fluorobenzoyl)benzene (1,3-FBB) and 3,3′,5,5′-tetramethyl-4,4′-biphenol (TMBP) by aromatic nucleophilic polycondensation. The chemical structures of SPEEKKs were confirmed by FT-IR spectroscopy and the Ds values of the polymers were calculated by 1H NMR and titration methods, respectively. The thermal stabilities of the SPEEKKs in acid and sodium forms were characterized by thermogravimetric analysis (TGA), which showed that SPEEKKs had excellent thermal properties at high temperatures. All the SPEEKK polymers were easily solution cast into tough membranes. Water uptakes, proton conductivities and methanol diffusion coefficients of the SPEEKK membranes were measured. Water uptake increased with Ds and temperature. Compared to Nafion, the SPEEKK-60, -70 and -80 membranes showed higher proton conductivities at 80°C, while the other SPEEKK membranes showed relatively lower proton conductivities. This may be due to the different distribution of ion-conducting domains in membrane. However, these membranes showed lower methanol diffusions in the range of 8.32×10−9 to 1.14×10−7cm2s−1 compared with that of Nafion (2×10−6cm2s−1) at the same temperature. The membranes also showed excellent mechanical properties (with a Young's modulus>1GPa and a tensile strength>40MPa). These results indicate that the SPEEKK membranes are promising materials for use in direct methanol fuel cell (DMFC) applications.

Sulfonated Poly(ether Ether Ketone)/polybenzimidazole Oligomer/epoxy Resin Composite Membranes in Situ Polymerization for Direct Methanol Fuel Cell Usages

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

SPEEK/epoxy resin composite membranes in situ polymerization for direct methanol fell cell usages

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Novel Sulfonated Poly(Ether Ether Ketone) with Pendant Benzimidazole Groups As A Proton Exchange Membrane for Direct Methanol Fuel Cells

Preparation and Properties of Sulfonated Poly(ether Ether Ketone)s (speek)/polypyrrole Composite Membranes for Direct Methanol Fuel Cells

Cross-linked polyelectrolyte for direct methanol fuel cells applications based on a novel sulfonated cross-linker

Properties of Composite Membranes Based on Sulfonated Poly(ether Ether Ketone)s (speek)/phenoxy Resin (PHR) for Direct Methanol Fuel Cells Usages

Composite Membranes Based on a Novel Benzimidazole Grafted PEEK and SPEEK for Fuel Cells

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Novel Sulfonated Poly(ether Ether Ketone Ketone)s for Direct Methanol Fuel Cells Usage: Synthesis, Water Uptake, Methanol Diffusion Coefficient and Proton Conductivity

Silane Cross-Linked Sulfonted Poly(Ether Ketone/Ether Benzimidazole)s for Fuel Cell Applications

Sulfonated poly (ether ether ketone)/MOF hybrid polymer electrolyte membrane with ultra‐low methanol permeability for enhanced direct methanol fuel cell performance

Composite membranes based on fully sulfonated poly(aryl ether ketone)/epoxy resin/different curing agents for direct methanol fuel cells

Advances in the Application of Sulfonated Poly(Ether Ether Ketone) (SPEEK) and Its Organic Composite Membranes for Proton Exchange Membrane Fuel Cells (PEMFCs)

Preparation and characterization of sPEEK/SiO2 hybrid proton exchange membrane

Cross Linked SPEEK/SiO_2 Hybrid Proton Exchange Membranes for Direct Methanol Fuel Cells