Abstract:As one of the most essential components of fuel cells, the commercialized Nafion-based proton exchange membranes(PEMs) suffer from several drawbacks like high cost and methanol permeability. The aim of this work is to fabricate a high performance PEM with combined low cost and methanol permeability together with high proton conductivity. Three-dimensional hierarchical molybdenum disulfide (MoS2) nanoflower is synthesized via a facile one-pot hydrothermal method, and then was embedd into sulfonated poly ether ether ketone (SPEEK) matrix to prepare composite PEM. The three-dimensional hierarchical architectures of MoS2 nanoflower can not only avoid the aggregation of MoS2 nanosheets but also provide abundant surface area and active sites, which are of benefit to fully take advantage of the intrinsic water absorption and methanol diffusion resistance ability of MoS2 nanosheets. The formed hydrogen bond network with water passway contributes to the improvement in proton conduction of composite membrane. As a consequence, composite membrane with 1 wt% MoS2 nanoflower loading content achieves optimized proton conductivity (0.123 S cm−1, 80 °C) and methanol permeability (21.5 × 10–7 cm2 s−1, 70 °C), which is 59.7% higher and 79.1% lower than that of SPEEK control membrane. Owing to increased proton conductivity and decreased methanol permeability, the maximum power density of the SPEEK/MoS2-1 composite membrane is 82.7 mW cm−2 at 70 °C, which is nearly 64.7% higher than that of pure SPEEK membrane (only 50.2 mW cm−2). Furthermore, the durability test confirms that the SPEEK/MoS2 composite membrane still possesses satisfactory stability even after continuous operation at 70 °C for 100 h.

Silane Cross-Linked Sulfonted Poly(Ether Ketone/Ether Benzimidazole)s for Fuel Cell Applications

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Effect of “bridge” on the performance of organic-inorganic crosslinked hybrid proton exchange membranes via KH550

Novel Modification Method to Prepare Crosslinked Sulfonated Poly(ether Ether Ketone)/silica Hybrid Membranes for Fuel Cells

Cross-linked polyelectrolyte for direct methanol fuel cells applications based on a novel sulfonated cross-linker

Novel Sulfonated Poly(ether Ether Ketone Ketone)s for Direct Methanol Fuel Cells Usage: Synthesis, Water Uptake, Methanol Diffusion Coefficient and Proton Conductivity

Cross Linked SPEEK/SiO_2 Hybrid Proton Exchange Membranes for Direct Methanol Fuel Cells

Sulfonated Poly(ether Ether Ketone)/polybenzimidazole Oligomer/epoxy Resin Composite Membranes in Situ Polymerization for Direct Methanol Fuel Cell Usages

Novel Sulfonated Poly(Ether Ether Ketone) with Pendant Benzimidazole Groups As A Proton Exchange Membrane for Direct Methanol Fuel Cells

A novel sulfonated poly(ether ether ketone) and cross-linked membranes for fuel cells

Synthesis and crosslinking of hydroxyl-functionalized sulfonated poly(ether ether ketone) copolymer as candidates for proton exchange membranes

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Cross-linked Hydroxide Conductive Membranes with Side Chains for Direct Methanol Fuel Cell Applications

Homopolymer-like sulfonated phenyl- and diphenyl-poly(arylene ether ketone)s for fuel cell applications

Development of sulfonic acid–functionalized tetraethyl orthosilicate derivative cross-linked with sulfonated PEEK membranes for fuel cell applications

A Facile Approach to Prepare Self-Cross-Linkable Sulfonated Poly(Ether Ether Ketone) Membranes for Direct Methanol Fuel Cells

Preparation and characterization of sPEEK/SiO2 hybrid proton exchange membrane

Novel covalent-ionically cross-linked membranes with extremely low water swelling and methanol crossover for direct methanol fuel cell applications