Abstract:As one of the most essential components of fuel cells, the commercialized Nafion-based proton exchange membranes(PEMs) suffer from several drawbacks like high cost and methanol permeability. The aim of this work is to fabricate a high performance PEM with combined low cost and methanol permeability together with high proton conductivity. Three-dimensional hierarchical molybdenum disulfide (MoS2) nanoflower is synthesized via a facile one-pot hydrothermal method, and then was embedd into sulfonated poly ether ether ketone (SPEEK) matrix to prepare composite PEM. The three-dimensional hierarchical architectures of MoS2 nanoflower can not only avoid the aggregation of MoS2 nanosheets but also provide abundant surface area and active sites, which are of benefit to fully take advantage of the intrinsic water absorption and methanol diffusion resistance ability of MoS2 nanosheets. The formed hydrogen bond network with water passway contributes to the improvement in proton conduction of composite membrane. As a consequence, composite membrane with 1 wt% MoS2 nanoflower loading content achieves optimized proton conductivity (0.123 S cm−1, 80 °C) and methanol permeability (21.5 × 10–7 cm2 s−1, 70 °C), which is 59.7% higher and 79.1% lower than that of SPEEK control membrane. Owing to increased proton conductivity and decreased methanol permeability, the maximum power density of the SPEEK/MoS2-1 composite membrane is 82.7 mW cm−2 at 70 °C, which is nearly 64.7% higher than that of pure SPEEK membrane (only 50.2 mW cm−2). Furthermore, the durability test confirms that the SPEEK/MoS2 composite membrane still possesses satisfactory stability even after continuous operation at 70 °C for 100 h.

Improved performance of nafion membranes by blending ultra-high molecular weight polyvinylidene fluoride

Optimizing the Molecular Weight of Poly(vinylidene Fluoride) for Competitive Perfluorosulfonic Acid Membranes

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Composite membranes of Nafion and poly(styrene sulfonic acid)-grafted poly(vinylidene fluoride) electrospun nanofiber mats for fuel cells

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

Zwitterion-functionalized nanofiber-based composite proton exchange membranes with superior ionic conductivity and chemical stability for direct methanol fuel cells

Enhanced properties of Nafion nanofibrous proton exchange membranes by altering the electrospinning solvents

PA-doped nanofiber composite proton exchange membranes with ultrahigh proton conductivity and methanol barrier performance for direct methanol fuel cells

Effect of a fluorocarbon- and hydrocarbon-based hybrid surfactant on the preparation of Nafion/ePTFE-reinforced composite membranes

Property Enhancement Effects of Side-Chain-Type Naphthalene-Based Sulfonated Poly(arylene ether ketone) on Nafion Composite Membranes for Direct Methanol Fuel Cells

Proton-conductive aromatic membranes reinforced with poly(vinylidene fluoride) nanofibers for high-performance durable fuel cells

Polyelectrolyte Membranes Based on Nafion/Chitosan Blends for Direct Methanol Fuel Cell Application

Dimethylamine-tuned guanidinium arylphosphonate iHOFs and superprotonic conduction Nafion hybrid membranes for DMFCs

Amino-MIL-53(Al)-Nanosheets@Nafion Composite Membranes with Improved Proton/Methanol Selectivity for Passive Direct Methanol Fuel Cells

A High-Methanol-Permeation Resistivity Polyamide-Based Proton Exchange Membrane Fabricated via a Hyperbranching Design

Synergistic Molecular Alignment and Dipole Polarization in Stretched Nafion/Poly(vinylidene fluoride) Blend Membranes for High Proton Conduction in PEMFCs

Revisiting Nafion membranes by introducing ammoniated polymer with norbornene to improve fuel cell performance

Sulfonated poly(fluorene ether ketone) (SPFEK)/α-zirconium phosphate (ZrP) nanocomposite membranes for fuel cell applications

A High-Performance Membrane Electrode Assembly for Polymer Electrolyte Membrane Fuel Cell with Poly(arylene Ether Sulfone) Nanofibers As Effective Membrane Reinforcements

Recent developments in high-performance Nafion membranes for hydrogen fuel cells applications