Abstract:Although there has been great progress, the commercialization of proton exchange membrane fuel cells (PEMFCs) is still hindered by high cost due to the use of Pt catalysts. Furthermore, structural improvement of the catalyst layers is limited by inadequate studies of the ultrathin perfluorosulfonic acid ionomer (e.g., Nafion ionomer) film in the catalyst layers. During the preparation of the catalyst ink, the dispersion solvent affects the morphology of Nafion ionomers, which affects the microstructure and proton conduction behavior of the Nafion thin film wrapped on the surface of the catalyst particles after the catalyst layer is formed. To simulate the aggregation of ionomers in the catalyst layer, a self-assembly technology was used to obtain nanoscale Nafion thin films with precise and controllable thickness on a SiO2 model substrate. The proton conductivity and microstructure of the Nafion thin films were obtained through electrochemical impedance spectroscopy and a series of micro-characterization methods. Furthermore, the relationship between proton conduction behavior within ultrathin Nafion films and colloidal morphology in Nafion solution was studied using different organic solvents. The goal was to explore and establish the microstructure model of nanoscale Nafion thin films through micro-characterization technologies, such as nuclear magnetic resonance and dynamic light scattering. It was found that at the nanoscale, Nafion thin films (similar to 40 nm) result in low proton conductivity; an order of magnitude lower than that of bulk membranes (similar to 10-100 mu m). However, replacing iso-propanol with n-butanol (which has a lower dielectric constant) as the dispersion media of the Nafion ionomer improved the proton conductivity of the Nafion thin films. This is because Nafion in solvents with a lower dielectric constant possesses higher main chain solubility and mobility. Thus, Nafion molecules more easily aggregate into large rod-shaped micelles, which is beneficial to the construction of proton conduction channels after the self-assembly process. Furthermore, the electrostatic force between Nafion aggregates and the substrate in solvents with lower dielectric constant is smaller. This means more sulfonic groups are involved in the formation of proton conduction channels that in turn improve the proton conductivity of the Nafion thin film. In general, Nafion in solvents with lower dielectric constant leads to a structure that can facilitate proton conduction. This study provides guidance for optimizing the structure of ultrathin Nafion films and improving the proton conduction in the catalyst layers of PEMFCs.

Synergistic Molecular Alignment and Dipole Polarization in Stretched Nafion/Poly(vinylidene fluoride) Blend Membranes for High Proton Conduction in PEMFCs

Hybrid Nafion Membranes of Ionic Hydrogen-Bonded Organic Framework Materials for Proton Conduction and PEMFC Applications

Anisotropic membrane with high proton conductivity sustaining upon dehydration

Precise Molecular-Level Modification of Nafion with Bismuth Oxide Clusters for High-performance Proton-Exchange Membranes

Nano-spheres stabilized poly(vinyl phosphonic acid) as proton conducting membranes for PEMFCs

Effect of a fluorocarbon- and hydrocarbon-based hybrid surfactant on the preparation of Nafion/ePTFE-reinforced composite membranes

Improved performance of nafion membranes by blending ultra-high molecular weight polyvinylidene fluoride

Study on Control of Polymeric Architecture of Sulfonated Hydrocarbon-Based Polymers for High-Performance Polymer Electrolyte Membranes in Fuel Cell Applications

Supramolecular Complexation of Metal Oxide Cluster and Non‐Fluorinated Polymer for Large‐Scale Fabrication of Proton Exchange Membranes for High‐Power‐Density Fuel Cells

High Performance Nanocomposite Proton Exchange Membranes Based on the Nanohybrids Formed by Chemically Bonding Phosphotungstic Acid with Covalent Organic Frameworks

Perfluorocyclobutyl (Pfcb)-Based Polymer Blends for Proton Exchange Membrane Fuel Cells (Pemfcs)

Property Enhancement Effects of Side-Chain-Type Naphthalene-Based Sulfonated Poly(arylene ether ketone) on Nafion Composite Membranes for Direct Methanol Fuel Cells

Rough-surfaced Polybenzimidazole Membranes Incorporating Sulfonated Porous Aromatic Frameworks for Simultaneous Enhancement of Proton Conduction and Membrane Electrode Assembly Optimization

Proton conducting membranes based on semi-interpenetrating polymer network of Nafion® and polybenzimidazole

High-performance fuel cells using Nafion composite membranes with alignment of sulfonated graphene oxides induced by a strong magnetic field

Nafion based semi-interpenetrating polymer network membranes from a cross-linkable SPAEK and a fluorinated epoxy resin for DMFCs

Challenging reinforced composite polymer electrolyte membranes based on disulfonated poly(arylene ether sulfone)-impregnated expanded PTFE for fuel cell applications

Nanofiber hybrid membranes: progress and application in proton exchange membranes

Enhanced Proton Conductivity of Proton Exchange Membranes by Incorporating Sulfonated Metal-Organic Frameworks

Effects of Dispersion Solvents on Proton Conduction Behavior of Ultrathin Nafion Films in the Catalyst Layers of Proton Exchange Membrane Fuel Cells

Cross-Aligned PTFE Nanofiber Reinforced Composite Membrane for PEM Fuel Cells