Abstract:As the core component of new energy vehicles, the safe operation of polymer electrolyte fuel cells has become more important with the rapid development of the new energy field. Since polymer electrolyte membrane (PEM) works at a hydrated environment, the mechanical properties of its hydrated state must remain stable. At present, studies have shown that the increase of water content will reduce the mechanical properties of materials, such as the decrease of Young's modulus, but the microscopic mechanism has not been elucidated. This presents a challenge to the work to develop novel PEMs. We tried to use the method of coarse-grained (CG) molecular dynamics (MD) simulation to study the microscopic mechanism of the mechanical properties of basic PEM Nafion membrane under different water content conditions. The purpose of this study is to seek to demonstrate the microscopic mechanism by which macroscopic mechanical properties are determined from the MD perspective, thereby providing general guidance for the future development of novel PEMs. More specifically, we tested the Nafion membrane (CG model with 4 beads on the main chain and 2 beads on the side chain) under tensile and compressive stress (strain 0-0.5) at different water contents (2-14). Quantified micro-parameters make it possible to establish macro-micro relationships. Considering that our chosen Nafion is the basic model, it may have good generality to other complex models. At the macroscopic level, our results show that increasing the water content reduces Young's modulus of the material. The decreasing rate of Young's modulus shows a slowing trend. This is in good agreement with previous research. At the microscopic level, our results show that the coordination number between any two types of atoms except water molecules within the same volume decreases with increasing water content, suggesting that the increase in water molecules forces other atoms to away from each other, thereby increasing the spacing between molecules. Therefore, the dominant force on this distance scale, that is, the electrostatic attraction between positive and negative ions is reduced. We have a reason to think that this is the main micromechanical factor to change macroscopic mechanical properties. In addition, the results of polymer chain entanglement parameters show that the degree of entanglement of polymer chains deepened with the increase of water content. The complex entangled structure will increase the difficulty of the polymer deformation. We believe that this is one of the micromechanical factors to decrease the Young's modulus. The study of these mechanisms may help in the development of new Nafion materials.

Correlations Between Microstructures and Properties of Pd-modified Nafion® Membranes

Effects of Microstructure on the Retention of Proton Conductivity of Nafion/SiO2 Composite Membranes at Elevated Temperatures:An in Situ SAXS Study

Impact of Graphitic Carbon Nitride/polydopamine on Permeance and Antifouling Performance of Reverse Osmosis Membranes

Localized Electrochemical Impedance Measurements on Nafion Membranes: Observation and Analysis of Spatially Diverse Proton Transport Using Atomic Force Microscopy.

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Nanocomposite Membranes of Nafion and Fe3o4-Anchored and Nafion-Functionalized Multiwalled Carbon Nanotubes Exhibiting High Proton Conductivity and Low Methanol Permeability for Direct Methanol Fuel Cells

Modification of Hydrophilic Channels in Nafion Membranes by Dmba: Mechanism and Effects on Proton Conductivity

Properties and DMFC performance of nafion/mordenite composite membrane fabricated by solution-casting method with different solvent ratio

Enhanced properties of Nafion nanofibrous proton exchange membranes by altering the electrospinning solvents

Outstanding proton conductivity over wide temperature and humidity ranges and enhanced mechanical, thermal stabilities for surface-modified MIL-101-Cr-NH2/Nafion composite membranes

Property Enhancement Effects of Side-Chain-Type Naphthalene-Based Sulfonated Poly(arylene ether ketone) on Nafion Composite Membranes for Direct Methanol Fuel Cells

The Incorporation of Sulfonated PAF Enhances the Proton Conductivity of Nafion Membranes at High Temperatures

Carbon Dots with Multi-Functional Groups and the Application in Proton Exchange Membranes

Zwitterion-functionalized nanofiber-based composite proton exchange membranes with superior ionic conductivity and chemical stability for direct methanol fuel cells

Improved performance of nafion membranes by blending ultra-high molecular weight polyvinylidene fluoride

Supramolecular Modifying Nafion with Fluoroalkyl‐Functionalized Polyoxometalate Nanoclusters for High‐Selective Proton Conduction

Fabrication and characterization of a novel Nafion‐PTFE composite hollow fiber membrane

The proton conductivity and mechanical properties of Nafion®/ ZrP nanocomposite membrane

Molecular Dynamics Study on the Microscopic Mechanism of Mechanical Properties of Nafion Membrane

Amino-MIL-53(Al)-Nanosheets@Nafion Composite Membranes with Improved Proton/Methanol Selectivity for Passive Direct Methanol Fuel Cells

Enhancing Proton Conductivity and Dimensional Stability of Nanofiber Proton Exchange Membranes through In Situ Growth of MOF-Modified PVDF Nanofibers