Abstract:Publication date: 8 April 2024 Source: Journal of Nano Research Vol. 82 Author(s): Mayetu E. Segale, Touhami Mokrani, Rudzani A. Sigwadi Nafion®/silica nanocomposite membranes were prepared by impregnation method from Nafion® 117 and sol-gel pre-synthesized n-octadecyl-trimethoxy silane (C18TMS) coated silica nanoparticles. The scanning electron microscope (SEM) of pristine silica particles displayed monodispersed nanospheres with diameters ranging from 150-350 nm; while Brunauer-Emmett-Teller (BET) analysis presented 760 m2/g BET surface area, a micropore-mesopore bimodal distribution of micropore systems with respective pore volume at 14.6 Å and 17.0 Å (2.01 x 10-3 cm3/g.Å), as well as the prolific mesopores centered at 29.5 Å (5.64 x 10-2 cm3/g.Å). Characterization of Nafion® 117 based membranes on SEM, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and x-ray diffraction (XRD), and tensile stress exhibited varying surface morphology with silica loadings, structural interaction between membrane support and the ion exchanger, thermal stabilities (up to 330 °C), crystalline nature, and reasonable mechanical stability of nanocomposite membranes. The maximum water uptake (44.8 %) and proton conductivity of (1.14 x10-2 S/cm) were obtained on low Nafion®/SiO2 (5%) loaded membrane. While both composite membranes displayed the improved reduction in methanol permeability, 2.43x10-07 cm2/s at 80 °C was obtained with high Nafion®/SiO2 (10%) loading. Improved water uptake and proton conductivity substantiate the high ion exchange capacity (IEC) of 1.81 meq.g-1 when compared to IEC of 0.93 meq.g-1 [pristine Nafion®] and 1.46 meq.g-1 [Nafion®/SiO2 (10%)]. The increase in IEC value may be due to the high acid functionalization of additional sulfonic acid groups surrounded by hydrophilic segments of nanosilica, which improves the properties of the membrane. The high proton conductivity coupled with great water retention capabilities indicated that the Nafion®/SiO2 nanocomposite membranes could be utilized as proton exchange membranes for medium temperature methanol fuel cells. Keywords: Fuel cells; nanocomposite membrane; SiO2 nanofillers; methanol permeability; ion exchange capacity

The proton conductivity and mechanical properties of Nafion®/ ZrP nanocomposite membrane

Fabrication of Nafion/zwitterion-functionalized Covalent Organic Framework Composite Membranes with Improved Proton Conductivity

Synthesis and Characterization of Enhanced Proton-Conducting Nafion® 117- Silica Composite Membranes for Fuel Cell Applications

Proton conductivity and morphology of new composite membranes based on zirconium phosphates, phosphotungstic acid, and silicic acid for direct hydrocarbon fuel cells applications

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Sulfonated poly(fluorenyl ether ketone)/Sulfonated α-zirconium phosphate Nanocomposite membranes for proton exchange membrane fuel cells

Nafion/Zeolite Nanocomposite Membrane by in Situ Crystallization for a Direct Methanol Fuel Cell

Enhancement in Proton Conductivity and Thermal Stability in Nafion Membranes Induced by Incorporation of Sulfonated Carbon Nanotubes.

Preparation and performance of nano silica/Nafion composite membrane for proton exchange membrane fuel cells

Implantation of Nafion® Ionomer into Polyvinyl Alcohol/chitosan Composites to Form Novel Proton-Conducting Membranes for Direct Methanol Fuel Cells

Nanocomposite Membranes Based on Perfluorosulfonic Acid/ceramic for Proton Exchange Membrane Fuel Cells

Synthesis and Characterization of Nafion/cross-linked PVP Semi-Interpenetrating Polymer Network Membrane for Direct Methanol Fuel Cell

Non-destructive Fabrication of Nafion/silica Composite Membrane Via Swelling-Filling Modification Strategy for High Temperature and Low Humidity PEM Fuel Cell

Surfactant-assisted polymer electrolyte nanocomposite membranes for fuel cells

Porous Nafion nanofiber composite membrane with vertical pathways for efficient through-plane proton conduction

Preparation and characterization of nanometer oxide/Nafion composite membranes

Enhancement of Nafion based membranes for direct methanol fuel cell applications through the inclusion of ammonium-X zeolite fillers

Preparation of Zirconium Phosphate (zrp)/nafion1135 Composite Membrane and H+/VO2+ Transfer Property Investigation

Enhanced Proton Conductivity of Nafion Composite Membrane by Incorporating Phosphoric Acid-Loaded Covalent Organic Framework

Improving the performance of sulfonated polymer membrane by using sulfonic acid functionalized hetero‐metallic metal‐organic framework for DMFC applications

Synthesis and Characterization of Triazole Based Sulfonated Nanocrystalline Cellulose Proton Conductor