Abstract:Direct methanol fuel cells (DMFCs) offer a promising power source by utilizing liquid-state methanol as fuel, providing easy storage and transportability. Currently, DMFCs commonly employ perfluorosulfonic acid membranes, such as the well-known Nafion membrane, as proton exchange membranes. However, perfluorosulfonic acid membranes have significant drawbacks in DMFCs, including a high crossover rate, substantial swelling, poor thermal stability, and elevated costs. The crossover of methanol fuel to the cathode side is particularly detrimental as it can poison the precious Pt catalyst, leading to damage in the fuel cell system. In this manuscript, we propose a non-ionic proton exchange membrane based on the polycarbonate track etched (PCTE) membrane. The aligned nanopores in pristine PCTE, with a regular diameter, facilitate proton passage while mitigating the crossover of methanol molecules. This results in satisfactory proton conductivity and selectivity comparable to that of the commercial Gore membrane. By adding a layer of graphene treated with oxygen plasma for 10 seconds, methanol permeation can be reduced by 16.44%, while achieving a 42.11% increase in proton conductivity compared to the commercial Gore membrane. Furthermore, PCTE material offers a more cost-effective alternative to Gore membrane, with a 18.37% lower swelling ratio and significantly higher stability. These characteristics make PCTE a promising choice for DMFCs, offering potential improvements in performance and cost-effectiveness.

Pd and Pd-Cu Alloy Deposited Nafion Membranes for Reduction of Methanol Crossover in Direct Methanol Fuel Cells

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

A Palladium-Alloy Deposited Nafion Membrane for Direct Methanol Fuel Cells

Improvement of the Nafion–polytetrafluoroethylene Membranes for Potential Direct Methanol Fuel Cell Use by Reduction of the Methanol Crossover

Self-assembling multi-layer Pd nanoparticles onto Nafion™ membrane to reduce methanol crossover

Modification of Nafion™ membrane to reduce methanol crossover via self-assembled Pd nanoparticles

Noble metal nanowires incorporated Nafion® membranes for reduction of methanol crossover in direct methanol fuel cells

Structure and performance of composite Nafion® membranes with Pd for DMFC

Structure and Performance of Pd-Nafion® Composite Membranes for DMFC

Diphenylsilicate-incorporated Nafion® membranes for reduction of methanol crossover in direct methanol fuel cells

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

A Facile Surface Modification of Nafion Membrane by the Formation of Self-Polymerized Dopamine Nano-Layer to Enhance the Methanol Barrier Property

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Modification of Nafion membranes with ternary composite materials for direct methanol fuel cells

Completely eliminating the metal barrier cracks on Nafion for suppressing methanol crossover with anodic aluminum oxide substrates

Novel modification of Nafion®117 for a MEMS-based micro direct methanol fuel cell (μDMFC)

Evaluation and Optimization of Polycarbonate Track-Etched (PCTE) Membranes for Direct Methanol Fuel Cells.

Chemical modification of Nafion membrane with 3,4-ethylenedioxythiophene for direct methanol fuel cell application

Study on the preparation and properties of PVDF-blend-Nafion membranes

Formation of an integrated catalyst-coated membrane using electrohydrodynamic atomization Layer-by-Layer deposition for direct methanol fuel cells

Correlations Between Microstructures and Properties of Pd-modified Nafion® Membranes