Abstract:To increase the energy density of DMFC system, increasing the methanol concentration is an excellent solution. However, the severe methanol crossover problem limits the application of Nafion in DMFCs with a highly concentrated methanol solution. Here, we proposed a feasible approach to overcome this challenge where Nafion membrane was reinforced with a covalently crosslinked quaternized poly (arylene ether ketone) (PAEK) nano fiber mat for establishing acid-base ion-paired interfaces between them. Firstly, the bromomethylated PAEK precursor was prepared into a three-dimensional fibrous support material using electrospinning. The nanofibers were then quaternized and covalently crosslinked to embed in the Nafion matrix while maintaining their fiber morphology. During the membrane fabrication, the ion-paired interfaces were established between the -N(CH3)(3)(+) on the nanofibers and -SO3- groups of Nafion matrix. The strong ion-paired interaction resulted in low membrane swelling and methanol permeability. TEM confirmed that the hydrophilic ionic clusters were aggregated with controllably distribution along the nanofibers to create long-range and efficient proton transport channels. Therefore, the hybrid membrane F-CQPAEK@Nafion-1.0 showed a high proton conductivity of 0.21 S cm(-1) at 80 C. In 2 M DMFC, the maximum power density (PDmax) of this membrane reached 119.38 mW cm(-2), 2.78 times higher than that of recast Nafion. In 10 M DMFC, the PDmax of this hybrid membrane reached 65.31 mW cm(-2), which was 3.54 times higher than that of recast Nafion. The results illustrate the possibility of running Nafion-based hybrid membranes in DMFCs with a broad operational flexibility from low concentration to high concentration methanol solutions.

Modification of Nafion™ membrane to reduce methanol crossover via self-assembled Pd nanoparticles

Self-assembling multi-layer Pd nanoparticles onto Nafion™ membrane to reduce methanol crossover

A Facile Surface Modification of Nafion Membrane by the Formation of Self-Polymerized Dopamine Nano-Layer to Enhance the Methanol Barrier Property

Improvement of the Nafion–polytetrafluoroethylene Membranes for Potential Direct Methanol Fuel Cell Use by Reduction of the Methanol Crossover

Pd and Pd-Cu Alloy Deposited Nafion Membranes for Reduction of Methanol Crossover in Direct Methanol Fuel Cells

Methanol Crossover Reduction by Nafion Modification Via Layer-by-layer Self-Assembly Techniques

A Palladium-Alloy Deposited Nafion Membrane for Direct Methanol Fuel Cells

Noble metal nanowires incorporated Nafion® membranes for reduction of methanol crossover in direct methanol fuel cells

Au Nanoparticles Self-Assembled Onto Nafion Membranes for Use As Methanol-Blocking Barriers

Structure and performance of composite Nafion® membranes with Pd for DMFC

Modification of Nafion Membrane by Pd-impregnation Via Electric Field

Structure and Performance of Pd-Nafion® Composite Membranes for DMFC

Nanocomposite Membranes of Nafion and Fe3o4-Anchored and Nafion-Functionalized Multiwalled Carbon Nanotubes Exhibiting High Proton Conductivity and Low Methanol Permeability for Direct Methanol Fuel Cells

Diphenylsilicate-incorporated Nafion® membranes for reduction of methanol crossover in direct methanol fuel cells

Crosslinked PAEK-based Nanofiber Reinforced Nafion Membrane with Ion-Paired Interfaces Towards High-Concentration DMFC

Synthesis and Characterization of Nafion/cross-linked PVP Semi-Interpenetrating Polymer Network Membrane for Direct Methanol Fuel Cell

Study on the preparation and properties of PVDF-blend-Nafion membranes

Methanol-blocking Nafion composite membranes fabricated by layer-by-layer self-assembly for direct methanol fuel cells

An Effective Methanol-Blocking Membrane Modified with Graphene Oxide Nanosheets for Passive Direct Methanol Fuel Cells

Modification of Nafion membranes with ternary composite materials for direct methanol fuel cells

Completely eliminating the metal barrier cracks on Nafion for suppressing methanol crossover with anodic aluminum oxide substrates