Structural optimization and performance trade-off strategies for semi-crystalline sulfonated poly(arylene ether ketone) membranes in high-concentration direct methanol fuel cells
Di Liu,Yunji Xie,Zhe Zhao,Jinbao Li,Jinhui Pang,Zhenhua Jiang
DOI: https://doi.org/10.1016/j.jechem.2023.05.049
IF: 13.1
2023-06-22
Journal of Energy Chemistry
Abstract:Direct methanol fuel cells (DMFCs) have attracted extensive attention as promising next-generation energy conversion devices. However, commercialized proton exchange membranes (PEMs) hardly fulfill the demand of methanol tolerance for DMFCs employing high-concentration methanol solutions. Herein, we report a series of semi-crystalline poly(arylene ether ketone) PEMs with ultra-densely sulfonic-acid-functionalized pendants linked by flexible alkyl chains, namely, SL-SPEK- x (where x represents the molar ratio of the novel monomer containing multiple phenyl side chain to the bisfluoride monomers). The delicate structural design rendered SL-SPEK- x membranes with high crystallinity and well-defined nanoscale phase separation between hydrophilic and hydrophobic phases. The reinforcement from poly(ether ketone) crystals enabled membranes with inhibited dimensional variation and methanol penetration. Furthermore, microphase separation significantly enhanced proton conductivity. The SL-SPEK-12.5 membrane achieved the optimum trade-off between proton conductivity (0.182 S cm −1 , 80 °C), water swelling (13.6%, 80 °C), and methanol permeability (1.6×10 −7 cm 2 s −1 ). The DMFC assembled by the SL-SPEK-12.5 membrane operated smoothly with a 10 M methanol solution, outputting a maximum power density of 158.3 mW cm −2 , nearly twice that of Nafion 117 (94.2 mW cm −2 ). Overall, the novel structural optimization strategy provides the possibility of PEMs surviving in high-concentration methanol solutions, thus facilitating the miniaturization and portability of DMFC devices.
chemistry, physical,engineering, chemical, applied,energy & fuels