Highly Ion-Conductive Anion Exchange Membranes with Superior Mechanical Properties Based on Polymeric Ionic Liquid Filled Functionalized Bacterial Cellulose for Alkaline Fuel Cells

Zhanghu Yu,Wen-Chin Tsen,Ting Qu,Fan Cheng,Fuqiang Hu,Hai Liu,Sheng Wen,Chunli Gong

DOI: https://doi.org/10.1016/j.jmrt.2023.02.197

2023-01-01

Abstract:How to simultaneously improve the ionic conductivity and mechanical properties is a key problem facing currently used anion-exchange membranes (AEMs). Here, biomass-based bacterial cellulose (BC) was used as a porous template to make TiO2 localized minerali-zation around the surface of BC nanofibers, and constructed a TiO2-coated BC porous substrate (TiO2@BC) with hierarchical structure. Then, the coated TiO2 nanoparticles was densely grafted by quaternary ammonium groups to obtain high ionic conduction ability. After filling with a polymeric ionic liquid (PIL) with high ion exchange capacity through in situ polymerization and crosslinking, the obtained novel PIL-filled AEM possessed ultrahigh ionic conductivity of 100.5 mS cm -1 at 80 degrees C, which was 72.1% higher than that of the PIL-filled pure BC membrane (only 58.4 mS cm -1). Moreover, by the aid of the synergistic reinforcement effect of TiO2@BC, the membrane exhibited extremely high dry strength of 95.3 MPa and satisfactory wet strength and flexibility. When at fully hydrate state, the membrane with the size of 1 x 4 cm (width x length) can hang a bottle containing 1000 g of water. The single cell equipped with this membrane output the peak power density of 40.2 mW cm -2, showing its great potential as a high-performance biomass-based AEM.(c) 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).