Abstract:Due to its high versatility and cost-effectiveness, solution process has a remarkable advantage over physical or chemical vapor deposition (PVD/CVD) methods in developing flexible resistive random-access memory (RRAM) devices. However, the reported solution-processed binary oxides, the most promising active layer materials for their compatibility with silicon-based semiconductor technology, commonly require high-temperature annealing (>145 °C) and the RRAMs based on them encounter insufficient flexibility. In this work, an amorphous and uniform SiOx active layer was prepared by irradiating an inorganic polymer, perhydropolysilazane, with a vacuum ultraviolet of 172 nm at room temperature. The corresponding RRAM showed typical bipolar resistance switching with a forming-free behavior. The device on polyimide film exhibited outstanding flexibility with a minimum bending radius of 0.5 mm, and no performance degradation was observed after bending 2000 times with a radius of 2.3 mm, which is the best among the reported solution-processed binary oxide-based RRAMs and can even rival the performance of PVD/CVD-based devices. This room-temperature solution process and the afforded highly flexible RRAMs have vast prospects for application in smart wearable electronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16556?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16556</a>.XRD patterns of the Au substrate and VUV-irradiation SiOx films on Au substrate (Figure S1); the SEM image of the SiOx layer on Au/glass substrate (Figure S2); the electroforming-free performance of the prepared device (Figure S3); I–V curves in a semilogarithmic plot of the Ag/SiOx/Au/glass device in vacuum environment (7.4 × 10–3 Pa) (Figure S4); the wide-scan XPS spectra of the SiOx fabricated with different heating temperatures and VUV-irradiation processes (Figure S5); the I–V curve for the 8 nm device after a few cycles and the 50 nm device (Figure S6); the relationship between the coefficient of variation (σ/μ) and size (Figure S7); the I–V curve of the HRS fitting with SCLC, P-F emission, and thermionic emission mechanism; the I–V curves of the HRS fitting with the Schottky emission mechanism at different temperatures from 303 to 343 K (Figure S8); the I–V measurement result during 349 cycles corresponding to <a class="internalNav" href="#fig3">Figure </a><a class="internalNav" href="#fig3">3</a>c drawn in a diagram (Figure S9); the I–V measurement result for Ti/SiOx/Au/glass during 108 cycles (Figure S10); the resistance of HRS and LRS as a function of the bending strain in outward direction (Figure S11); the change of the resistance with bending numbers in outward direction with a radius of 0.5 mm (Figure S12); the nano-indentation test (by Agilent Nano Indenter G200) for the SiOx layer (Figure S13); the device-to-device data corresponding to <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a,c,d, respectively (Figure S14); the pictures of the hand-made hinge structure (Figure S15); and the details of the bending experiments (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16556/suppl_file/am0c16556_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Low-stress Silicon Oxynitride Bridge Used for MEMS Switch

Realization of A Series Contact Mems Switch with Sion Dielectric Bridge

A dielectric-bridge-type MEMS series contact switch for 0-10GHz applications

Deposition of SiOxNy films as gate insulator via r.f. reactive sputtering

Fabrication of Silicon Highly-Rich SiO<inf>x</inf>(x&#x003C;0.75) and Its Novel Resistive Switching Behaviors

Novel Process for Fabrication of RF MEMS Switch with High Mechanical Reliability

Resistive Switches and Memories from Silicon Oxide.

Low Voltage Resistive Switching Devices Based on Chemically Produced Silicon Oxide

A Highly Reliable Lateral MEMS Switch Utilizing Undoped Polysilicon As Isolation Material

Novel MEMS Torsional Mirror Optical Switch

Design and Fabrication of a F-P Optical Switch Based on MOEMS Technology

Characterization of the Young's Modulus and Residual Stresses for a Sputtered Silicon Oxynitride Film Using Micro-Structures

Resistive Switching Mechanism In Silicon Highly Rich Siox (X < 0.75) Films Based On Silicon Dangling Bonds Percolation Model

Room-Temperature, Solution-Processed SiO x via Photochemistry Approach for Highly Flexible Resistive Switching Memory

Laterally Actuated Si-to-Si DC MEMS Switch for Power Switching Applications

Low Voltage, High Speed and Small Area In-Plane MEMS Switch

Resistive Switching with Self-Rectifying Behavior in Cu/Siox/Si Structure Fabricated by Plasma-Oxidation

Oxygen-induced Bi-Modal Failure Phenomenon in SiOx-based Resistive Switching Memory

The Ultra‐Low Power Performance of A‐sinxoy:H Resistive Switching Memory

Nanocrystalline Si Pathway Induced Unipolar Resistive Switching Behavior from Annealed Si-rich SiNx/SiNy Multilayers

Low voltage cold and hot switching in nanoswitches cleaned by in situ oxygen plasma can achieve low stable contact resistance