Abstract:In order to address the problem of CT saturation, a novel measurement‐protection‐integrated current transformer (MPICT) is proposed. To verify the feasibility and effectiveness of the MPICT, a series of theoretical analyses, 3D FEM simulations and laboratory tests are conducted. The simulation and experimental results indicate that the MPICT not only simultaneously satisfies the accuracy requirements in IEC 61,869‐2 for measuring CTs and protective CTs, but also has excellent DC tolerance capability. Current transformers (CTs) are widely used for energy metering, relay protection, condition monitoring and control circuits. However, CT saturation may lead to non‐negligible measurement errors and relay malfunctions, posing a threat to the stability and security of the power grid. In order to address the problem of CT saturation, a novel measurement‐protection‐integrated current transformer (MPICT) is proposed. First, the working states of the MPICT are summarised and the approximate expressions for the steady‐state measuring characteristics, the transient response characteristics, and the measurement errors are derived from the equivalent circuit model. Then, the feasibility of the MPICT and the theoretical analyses are verified by the 3D FEM simulation imitating the presented MPICT excited by diverse currents. Finally, a down‐scale prototype is fabricated and a series of tests are conducted in the laboratory to validate the effectiveness of the equipment. The simulation and experimental results suggest that the output of the MPICT can accurately reconstruct the primary current waveform, even if the primary current contains decaying or constant DC component.

Research on improvements of using electronic current transformer on distance protection

Infulence of Current Transformer Saturation on the Distance Protection

The research and application on interfacing technology between Electronic Current Transformer and relay protection

Electromagnetic Disturbed Mechanism of Electronic Current Transformer Acquisition Card under High Frequency Electromagnetic Interference

Analysis of ECT effect on accuracy of measurement and protection

MAGNETIC RESTRAINING DIFFERENTIAL BUS PROTECT

THE INFLUENCE OF CURRENT TRANSFORMER SATURATION ON BUS PROTECTION

A novel measurement‐protection‐integrated current transformer based on hybrid core and magnetic field sensor

Double Air-gap Current Transformer Applied to High Voltage Transmission Line On-site Mobile Comparison System

A Novel Transient Saturation Detection Method for P-Class Current Transformer Using Improved Hausdorff Distance Algorithm

A Novel Method for Current Transformer Saturation Countermeasure Based on Comparing Two Currents' Polarities

Research on the Practicality of Current Transformer Saturation Detection Using the Magnetic Restraint Principle

ANALYSIS AND COUNTERMEASURE FOR MISOPERATION OF LONGITUDINAL DIFFERENTIAL PROTECTION WITH UNCLEAR REASON

The Principle of Transformer Differential Protection Based on Wave Comparison

220 Kv Active Electronic Current Transformer

A Novel Current Transformer Based on Virtual Air Gap and Its Basic Measuring Characteristics

TheDesign Andimprovement Ofhighvoltage SideCircuit Inelectronic Current Transformer

Temperature Characteristic Analysis on Electronic Current Transformer

Research on Local Backup Protection of Transformer and Substation Area Backup Protection

High-frequency Equivalent Circuit Modeling for Overvoltage Detection

Introduction of an intriguing approach for eletric current transformer on-site examining repairing