Abstract:High-resolution patterning of periodic structures over large areas has several applications in science and technology. One such method, based on the long-known Talbot effect observed with diffraction gratings, is achromatic Talbot lithography (ATL). This method offers many advantages over other techniques, such as high resolution, large depth of focus, high throughput, etc. Although the technique has been studied in the past, its limits have not yet been explored. Increasing the efficiency and the resolution of the method is essential and might enable many applications in science and technology. In this work, we combine this technique with spatially coherent and quasi-monochromatic light at extreme ultraviolet (EUV) wavelengths and explore new mask design schemes in order to enhance its throughput and resolution. We report on simulations of various mask designs in order to explore their efficiency. Advanced and optimized nanofabrication techniques have to be utilized to achieve high quality and efficient masks for ATL. Exposures using coherent EUV radiation from the Swiss light source (SLS) have been performed, pushing the resolution limits of the technique for dense hole or dot patterning down to 40 nm pitch. In addition, through extensive simulations, alternative mask designs with rings instead of holes are explored for the efficient patterning of hole/dot arrays. We show that these rings exhibit similar aerial images to hole arrays, while enabling higher efficiency and thereby increased throughput for ATL exposures. The mask designs with rings show that they are less prone to problems associated with pattern collapse during the nanofabrication process and therefore are promising for achieving higher resolution.

TCC reverse engineering through circular sampling and Genetic Algorithm

A composite algorithm of lithography process in AlGaN/GaN-on-SiC HEMTs manufacturing

OPC model calibration based on circle-sampling theorem

Fast Level-Set-Based Inverse Lithography Algorithm for Process Robustness Improvement and Its Application

An analytic gradient-based inverse lithography approach for partially-coherent double-exposure lithography

Strengths, Weaknesses, and Applications of Computational Axial Lithography in Tissue Engineering

New Modeling and Optimization Method Suitable for UDSM Lithography Simulation

DMD maskless lithography optimization based on an improved genetic algorithm

Mask Synthesis for Aerial Image Fidelity in Optical Lithography Using A Coarse-Grid-Approximation Level-Set Approach

Source and Mask Co-Optimization Using A Gradient Based Method in Optical Lithography

ILT Approach for Compensating 3-D Mask Effects

GPU-Accelerated Inverse Lithography Towards High Quality Curvy Mask Generation

A Gradient-Based Inverse Lithography Technology For Double-Dipole Lithography

DIRECT: An Efficient Optimization Scheme for Mask Generation Using Inverse Lithography

A Study of the Impact on Telecentricity to the Illumination System Based on Ccd Imaging

A highly efficient optimization algorithm for pixel manipulation in inverse lithography technique

A Robust Pixel-Based RET Optimization Algorithm Independent of Initial Conditions

Segmentation Optimization Method for Optical Proximity Correction Based on Lithography Model

Global optimisation of source and mask in inverse lithography via tabu search combined with genetic algorithm.

Improving the Resolution and Throughput of Achromatic Talbot Lithography

Efficient Mask Design for Inverse Lithography Technology Based on 2D Discrete Cosine Transformation (DCT)