Abstract:Recent trends of interferometric wavefront sensing tend to focus on high precision, anti-vibration, compact, along with much more involved of electric and computer technology. And the optical principles employed not only limit to interference but also include diffraction, scattering, polarization, etc. In this paper, some selected examples basing on the research works in our group will be given to illustrate the trends mentioned above. To achieve extra high accuracy, phase-shifting point diffraction interferometry (PS-PDI) is believed to be a good candidate as it employs a nearly perfect point diffraction spherical wavefront as the reference and also takes advantage of the high precision of phase-shifting algorithms. Cyclic radial shearing interferometry (C-RSI) successively demonstrate the anti-vibration characteristic and can diagnose transient wavefront with only one single shot by employing a three-mirror common-path configuration and a synchronizing system. In contrast sharply with those early interferometers, interferometers with very compact configuration are more suitable to develop portable wavefront sensing instruments. Cross-grating lateral shearing interferometer (CG-LSI) is a very compact interferometer that adopts a cross-grating of millimeters to produce lateral shearing of the diffraction wave of the test wavefront. Be aware that, computer technique has been used a lot in all of the above interferometers but the non-null annual sub-aperture stitching interferometer (NASSI) for general aspheric surface testing mostly relies on the computer model of the physical interferometer setup and iterative ray-tracing optimization. The principles of the above mentioned interferometric wavefront sensing methods would be given in detail.

A Study of the Impact on Telecentricity to the Illumination System Based on Ccd Imaging

Measurement Technique of Telecentricity for the Illumination System in the 193 Nm Photolithography

A Novel Telecentricity Measuring Method for Illumination System in Lithography Based on Pinhole Imaging

Measurement of Led Spatial Intensity Distribution Using Imaging

Focusing and Leveling System for Optical Lithography Using Linear Ccd

Compact Ultraviolet Light-Emitting Diode-Based Lithography Illumination System with Tunable Coherent Factor

Effect of Light Source Uniformity for Imaging Ellipsometry Measurements

Fast Wafer Focus Measurement System for Photolithography Using On-Axis Structure Illumination Method

A simulation imaging method for actual optical system and results analysis

Study on Influence of Integrating Sphere Test Position on Measuring Accuracy of Optical Parameters of LED Chip

Design Method for Telecentric Multiscale Imaging System to Avoid Mechanical Interference

The Effect of CCD on High Spatial Resolution Interferometric Optical Test

Recent Developments of Interferometric Wavefront Sensing

A Device for Examing the Imaging Plane’s Illumination Nonuniformity of Wide FOV and Short-Focus Optical Imaging System

Research on Auto-Centering Device in Surface Defects Evaluation System of Large Spherical Optics

Programmable Pupil Correction Method for Photolithography Illumination System

Calibration of Telecentric Cameras with an Improved Projection Model

An Improved Centroid Location Algorithm for Infrared LED Feature Points

Design of Lens Centering Error Measuring Optical System and Stray Light Analysis

Application of Telecentric Lens in Rotary Workpiece Measurement System

Cylindrical Lens Design with Illuminance Uniformity in the Image Plane of Critical Illumination System