Abstract:Micro-light emitting diodes (Micro-LEDs) based on III-nitride semiconductors have become a research hotspot in the field of high-resolution display due to its unique advantages. However, the edge effect caused by inductively coupled plasma (ICP) dry etching in Micro-LEDs become significant with respect to the decreased chip size, resulting in a great reduction in device performance. In this article, sector-shaped GaN-based blue Micro-LEDs are designed and fabricated. Additionally, the device performance of different size Micro-LEDs with passivation are investigated with respect to those without passivation. Several methods have been applied to minimize the etching damage near the edge, including acid-base wet etching and SiO2 passivation layer growth. The room temperature photoluminescence (PL) results demonstrate that the light emission intensity of Micro-LEDs can be significantly enhanced by optimized passivation process. PL mapping images show that the overall luminescence of properly passivated Micro-LEDs is enhanced, the uniformity is improved, and the effective luminescence area is increased. The recombination lifetime of carriers in Micro-LEDs are increased by the usage of passivation process, which proves the reduction in non-radiative recombination centers in Micro-LEDs and improved luminescence efficiency. As a result, the internal quantum efficiency (IQE) is improved from 14.9% to 37.6% for 10 μm Micro-LEDs, and from 18.3% to 26.9% for 5 μm Micro-LEDs.

Improvement on GaN-based LED Reversed Leakage Current Characteristic by Passivation Process

Study of GaN-Based LEDs With Hybrid SiO2 Microsphere/Nanosphere AntiReflection Coating as a Passivation Layer by a Rapid Convection Deposition

Three Orders of Reverse Leakage Reduction by Using Supercritical CO2 Nitriding Process on GaN Quasi-Vertical Schottky Barrier Diode

Effect of Surface Treatment of GaN Based Light Emitting Diode Wafers on the Leakage Current of Light Emitting Diode Devices

Improved electro-optical and photoelectric performance of GaN-based micro-LEDs with an atomic layer deposited AlN passivation layer.

Reduced Reverse Gate Leakage Current for P‐gan Gate High‐Electron‐Mobility Transistors by a Surface‐Etching Method

Leakage Reduction of Quasi-Vertical GaN Schottky Barrier Diode with Post Oxygen Plasma Treatment

Improved Optical and Electrical Characteristics of GaN-Based Micro-LEDs by Optimized Sidewall Passivation

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

Study of a GaN/InGaN-based Light Emitting Diode with an Indium Gallium Oxide Current Blocking Layer, Silver Nanoparticles, and a Gallium Oxide Surface Passivation Layer

Improvement of Electrostatic Discharge Characteristics of InGaN/GaN MQWs Light-Emitting Diodes by Inserting an N+-Ingan Electron Injection Layer and a P-Ingan/gan Hole Injection Layer

Improving the External Quantum Efficiency of High-Power GaN-Based Flip-Chip LEDs by Using Sidewall Composite Reflective Micro Structure

Leakage Current in GaN-on-GaN Vertical GaN SBDs Grown by HVPE on Native GaN Substrates

Research on the Current-voltage Characteristics of GaN-based High Power Flip-chip Blue LED

Improvement on Leakage Current for High Al-content AlGaN Schottky Diode by Fluoride-based Plasma Treatment

Thin Film GaN-Based LEDs on Cu Substrates Fabricated by Laser Lift-Off

Effects of Passivation Materials on Performance of Deep Ultraviolet LEDs

Performance Improvement of InGaN Red Light‐Emitting Diode by Using V‐Pits Layer and Step‐Graded GaN Barrier

Improvement of Dynamic On-Resistance in GaN-Based Devices with a High-Quality In Situ SiN Passivation Layer

Investigations of Sidewall Passivation Technology on the Optical Performance for Smaller Size GaN-Based Micro-LEDs

Improving the External Quantum Efficiency of High Power GaN Based Flip-Chip LEDs Using Ag/SiO2/DBR/SiO2 Composite ReflectiveStructure