Abstract:High-density integration technologies with copper (Cu) through-silicon via (TSV) have emerged as viable alternatives for achieving the requisite integration densities for the portable electronics and micro-electro-mechanical systems (MEMSs) package. However, significant thermo-mechanical stresses can be introduced in integrated structures during the manufacturing process due to mismatches of thermal expansion and the mechanical properties between Cu and silicon (Si). The high-density integration demands an interconnection material with a strong mechanical strength and small thermal expansion mismatch. In this study, a novel electroplating method is developed for the synthesis of a graphene-copper (G-Cu) composite with electrochemically exfoliated graphenes. The fabrication and evaluation of the G-Cu composite microstructures, including the microcantilevers and micromirrors supported by the composite, are reported. We evaluated not only the micromechanical properties of the G-Cu composite based on in-situ mechanical resonant frequency measurements using a laser Doppler vibrometer but also the coefficients of thermal expansion (CTE) of the composite based on curvature radius measurements at a temperature range of 20-200 °C. The Young's modulus and shear modulus of the composite are approximately 123 and 51 GPa, which are 1.25 times greater and 1.22 times greater, respectively, than those of pure Cu due to the reinforcement of graphene. The G-Cu composite exhibits a 23% lower CTE than Cu without sacrificing electrical conductivity. These results show that the mechanically strengthened G-Cu composite with reduced thermal expansion is an ideal and reliable interconnection material instead of Cu for complex integration structures.

Fabrication and thermal expansion properties of high dense Mo/Cu composites

Fabrication and characterization of high dense Mo/Cu composites for electronic packaging applications

The thermo-physical properties of high dense Mo/Cu composites fabricated by squeeze casting technology

Microstructure and thermal and electric conductivities of high dense Mo/Cu composites

Microstructure and Mechanical Properties of High Densification Mo/Cu Composites

Highly Dense Mo/Cu Composites Fabricated by Squeeze Casting and Their Thermal Conduction Properties

Microscopic Formation Mechanism and Physical Properties of Mo/Cu Composites with High Densification

Analysis of fabricating Mo-15 ％ Cu by pre-infiltration,warm-die-forging and rolling

Thermal Expansion and Mechanical Properties of High Reinforcement Content Sicp/Cu Composites Fabricated by Squeeze Casting Technology

Thermal Expansion Properties of SiCp/Cu Composites in Electronic Packaging Applications

Microstructure and thermal properties of SiCp/Cu composites with Mo coating on SiC particles

Sintering Behavior and Properties of Mo-Cu Composites

Preparation and Properties Study of Cu-MoSi<sub>2</sub> Composites

Mechanically strengthened graphene-Cu composite with reduced thermal expansion towards interconnect applications

Fabrication and thermo-physical properties of TiB2p/Cu composites for electronic packaging applications

Investigation on sintering and deformation strengthening of Mo-Cu alloy

Cyclic warm rolling: A path to superior properties in Mo Cu composites

New Strategy for Fusion Infiltration Processed Cu/Mocu/Cu Composites

The sintering behavior of ultra-fine Mo-Cu composite powders and the sintering properties of the composite compacts

Relationships between the properties and microstructure of Mo–Cu composites prepared by infiltrating copper into flame-sprayed porous Mo skeleton

Enhanced softening resistance and mechanical properties of Mo 2 C particle-reinforced Cu-matrix composites