Abstract:Molybdenum (Mo) is a refractory metal with exceptional high-temperature stability, resistance to creep, and low coefficient of thermal expansion, it thus has great potential for various high-temperature applications. Nevertheless, conventional methods of synthesizing Mo powder, such as mechanical milling and wet chemical processing, have encountered limitations in producing sintered bodies with high relative density and a fine grain structure while maintaining a low sintering temperature. Therefore, it is crucial to develop an efficient powder synthesis method that enables precise and uniform control over the powder's size and shape while minimizing contamination. Such an approach would contribute to achieving excellent formability and sinterability for the resulting Mo sintered body. In this study, we successfully demonstrated the ultrasonic spray pyrolysis (USP) technique in combination with hydrogen reduction for synthesizing pure Mo powder. The resulting Mo powder exhibited micro-sized secondary particles composed of nanoscale primary particles, leading to improved formability and sinterability, essential for fabricating high-quality sintered bodies. In order to comprehensively understand the properties of the as-prepared molybdenum oxide and hydrogen-reduced Mo powder, we employed various methods to analyze its physicochemical characteristics systematically. Subsequently, the fine Mo particles were subjected to a pressureless sintering process after a conventional uniaxial powder molding. Due to its excellent formability and sinterability, we achieved a Mo sintered body with a grain size of approximately 3 μm while maintaining a relatively high sintering density of 98.3% at a comparatively low sintering temperature of 1400 °C. The resulting microstructure contributed to a relatively high hardness of around 234 Hv. These results indicate the successful synthesis of pure Mo powder with desirable properties and highlight its potential in various applications, particularly those requiring high-quality sintered bodies with enhanced hardness.

Enhancing the physical properties of Mo-Cu composites through plasma spheroidized spherical molybdenum powder

Microstructure, Compressive Performance and Wear Resistance of Pure Molybdenum Additively Manufactured Via Laser Powder Bed Fusion

Improving the mechanical properties and coefficient of thermal expansion of molybdenum-reinforced copper using powder metallurgy

Sintering Densification of Cu/Al2O3p Nano-Composite Powders by Electroless Copper Plating

Preparation and properties of W-Mo-Cu composite using solution combustion synthesized W Mo solid solution nanopowder

The Influence of Ball Milling Conditions on the Powder Characteristics and Sintering Densification of Mo-Cu Alloy

Densification and Properties Investigation of W-Mo-Cu Composites Prepared by Large Current Electric Field Sintering with Different Technologic Parameter

Microstructure and mechanical properties of Mo–Cu–Zr composites fabricated via microwave sintering

A Powder Metallurgy Route to Fabricate CNT-reinforced Molybdenum-Hafnium-carbon Composites

Enhanced softening resistance and mechanical properties of Mo 2 C particle-reinforced Cu-matrix composites

Preparation of Ultrafine Tungsten-Molybdenum Composite Powder and Its Sintering Behavior

Sintering Behavior of W–30Cu Composite Powder Prepared by Electroless Plating

Effect of Mo-coated MoS2 powder addition on the microstructure and properties of sintered Fe-15Cu-0.8C antifriction materials

Multiphase strengthening mechanism of Cu-Y2O3/W composites prepared by mechanical alloying

Spray pyrolysis-based synthesis of pure molybdenum powder with nanoscale primary particles and its sintering characteristics

Preparation of high thermal conductivity copper–diamond composites using molybdenum carbide-coated diamond particles

Microstructure and Mechanical Properties of Composites Obtained by Spark Plasma Sintering of Ti3SiC2-15 vol.%Cu Mixtures

Powder Metallurgical Processing of Al–5 wt% Cu Matrix Composites Reinforced with MoSi2 and WSi2 Particulates

Simultaneous improvement of microstructure and high-temperature tensile properties in CNT-doped Mo-based composites

Enhanced interfacial wettability and mechanical properties of Ni@Al2O3/Cu ceramic matrix composites using spark plasma sintering of Ni coated Al2O3 powders

Effect of Mo content on interfacial microstructure and properties of explosive welded Mo–Cu/Cu plates