Abstract:Background: Recent developments in alpha and beta emitting radionuclide therapy highlight the importance of developing efficient methods for patient-specific dosimetry. Traditional tabulated methods such as Medical Internal Radiation Dose (MIRD) estimate the dose at the organ level while more recent numerical methods based on Monte Carlo (MC) simulations are able to calculate dose at the voxel level. A precalculated MC (PMC) approach was developed in this work as an alternative to time-consuming fully simulated MC. Once the spatial distribution of alpha and beta emitters is determined using imaging and/or numerical methods, the PMC code can be used to achieve an accurate voxelized 3D distribution of the deposited energy without relying on full MC calculations. Purpose: To implement the PMC method to calculate energy deposited by alpha and beta particles emitted from the Ra-224 decay chain. Methods: The GEANT4 (version 10.7) MC toolkit was used to generate databases of precalculated tracks to be integrated in the PMC code as well as to benchmark its output. In this regard, energy spectra of alpha and beta particles emitted by the Ra-224 decay chain were generated using GAMOS (version 6.2.0) and imported into GEANT4 macro files. Either alpha or beta emitting sources were defined at the center of a homogeneous phantom filled with various materials such as soft tissue, bone, and lung where particles were emitted either mono-directionally (for database generation) or isotropically (for benchmarking). Two heterogeneous phantoms were used to demonstrate PMC code compatibility with boundary crossing events. Each precalculated database was generated step-by-step by storing particle track information from GEANT4 simulations followed by its integration in a PMC code developed in MATLAB. For a user-defined number of histories, one of the tracks in a given database was selected randomly and rotated randomly to reflect an isotropic emission. Afterward, deposited energy was divided between voxels based on step length in each voxel using a ray-tracing approach. The radial distribution of deposited energy was benchmarked against fully simulated MC calculations using GEANT4. The effect of the GEANT4 parameter StepMax on the accuracy and speed of the code was also investigated. Results: In the case of alpha decay, primary alpha particles show the highest contribution (>99%) in deposited energy compared to their secondary particles. In most cases, protons act as the main secondary particles in the deposition of energy. However, for a lung phantom, using a range cutoff parameter of 10 µm on primary alpha particles yields a higher contribution of secondary electrons than protons. Differences between deposited energy calculated by PMC and fully simulated MC are within 2% for all alpha and beta emitters in homogeneous and heterogeneous phantoms. Additionally, statistical uncertainties are less than 1% for voxels with doses higher than 5% of the maximum dose. Moreover, optimization of the parameter StepMax is necessary to achieve the best tradeoff between code accuracy and speed. Conclusions: The PMC code shows good performance for dose calculations deposited by alpha and beta emitters. As a stand-alone algorithm, it is suitable to be integrated into clinical treatment planning systems.

Calculating method for induced radioactivity in an electron linear accelerators

Calculating method for induced radioactivity in an electron linac

Monte Carlo Calculation of Induced Radioactivity for a 15-MV Electron Accelerator Head Structure

Monte Carlo method for calculating the radiation skyshine produced by electron accelerators

Evaluating activation of the shielding walls of a treatment room using the Monte Carlo method

The Monte Carlo Simulation of Tsinghua Homo-Source Dual-Beam Medical Accelerator

Calculation of photoneutrons produced in the targets of electron linear accelerators for radiography and radiotherapy applications

Evaluation of Nuclear Activation of Tungsten Plates for Future Modeling of a Medical Accelerator

Fitting Monte Carlo simulation results with an empirical model of megavoltage x-ray beams for rapid depth dose calculations in water

Monte Carlo Simulations for Target Analyses

Establishment of a virtual source model of Varian RapidARC linear accelerator with 6 MeV X-ray

The Use of Variance Reduction Techniques for Photon Dose Estimation in the Design of Radiotherapy Facilities at 10 and 15 MeV via Monte Carlo Simulations

Absolute dose calibration and output factor simulation for flattened and flattening filter-free Monte Carlo model of 6 MV photon beams

Development of a stand-alone precalculated Monte Carlo code to calculate the dose by alpha and beta emitters from the Ra-224 decay chain

Monte Carlo Method for Calculating Particle Radiation Detector Correction Factors

Dose Measurement Experiments for Single and Composite Targets in 6 Mev Linear Accelerators

A hybrid Monte Carlo and response matrix Monte Carlo method in criticality calculation

Neutron and photon calculations of beam shaping assembly for BNCT based on Monte Carlo-discrete ordinates coupled method

Simulation of induced radioactivity for Heavy Ion Medical Machine

Comparison between Monte Carlo simulation and measurement of beam quality and output factor with flattened and flattening filter-free of linear accelerator

Monte Carlo Approach of Effective Delayed Neutron Fraction by k-Ratio Method with External Neutron Source