Abstract:Monte Carlo (MC) simulation is commonly considered as the most accurate method for radiation dose calculations. Commissioning of a beam model in the MC code against a clinical linear accelerator beam is of crucial importance for its clinical implementation. In this paper, we propose an automatic commissioning method for our GPU-based MC dose engine, gDPM. gDPM utilizes a beam model based on a concept of phase-space-let (PSL). A PSL contains a group of particles that are of the same type and close in space and energy. A set of generic PSLs was generated by splitting a reference phase-space file. Each PSL was associated with a weighting factor, and in dose calculations the particle carried a weight corresponding to the PSL where it was from. Dose for each PSL in water was pre-computed, and hence the dose in water for a whole beam under a given set of PSL weighting factors was the weighted sum of the PSL doses. At the commissioning stage, an optimization problem was solved to adjust the PSL weights in order to minimize the difference between the calculated dose and measured one. Symmetry and smoothness regularizations were utilized to uniquely determine the solution. An augmented Lagrangian method was employed to solve the optimization problem. To validate our method, a phase-space file of a Varian TrueBeam 6 MV beam was used to generate the PSLs for 6 MV beams. In a simulation study, we commissioned a Siemens 6 MV beam on which a set of field-dependent phase-space files was available. The dose data of this desired beam for different open fields and a small off-axis open field were obtained by calculating doses using these phase-space files. The 3D γ-index test passing rate within the regions with dose above 10% of dmax dose for those open fields tested was improved averagely from 70.56 to 99.36% for 2%/2 mm criteria and from 32.22 to 89.65% for 1%/1 mm criteria. We also tested our commissioning method on a six-field head-and-neck cancer IMRT plan. The passing rate of the γ-index test within the 10% isodose line of the prescription dose was improved from 92.73 to 99.70% and from 82.16 to 96.73% for 2%/2 mm and 1%/1 mm criteria, respectively. Real clinical data measured from Varian, Siemens, and Elekta linear accelerators were also used to validate our commissioning method and a similar level of accuracy was achieved.

Evaluating activation of the shielding walls of a treatment room using the Monte Carlo method

Study on Induced Radioactivity in Proton Therapy Accelerators

Assessment of radio-activation using spectroscopy in medical linear accelerators

The evaluation of neutron and gamma ray dose equivalent distributions in patients and the effectiveness of shield materials for high energy photons radiotherapy facilities

MCNP simulation of X-ray beam for a 15 MV medical linear accelerator

SU‐FF‐T‐452: the Manageable Levels of Induced Radioactivity in Medical Accelerators from High Energy Photon Beams

On the neutron radiation field and air activation around a medical electron linac

Monte Carlo Calculation of Induced Radioactivity for a 15-MV Electron Accelerator Head Structure

Physical Analysis of the Radiation Shielding for the Medical Accelerators

Modeling To Characterize Neutron Activation Products In A Medical Linear Accelerator

Evaluation of Nuclear Activation of Tungsten Plates for Future Modeling of a Medical Accelerator

SU-FF-T-296: Modeling to Characterize Neutron Activation Products in a Medical Linear Accelerator

An estimation of cost of concrete shielding in a radiotherapy room housing a clinical linear accelerator that produces high-energy photons

Radiation transport calculations for the European Spallation Source accelerator environment

Evaluation of equivalent dose from neutrons and activation products from a 15-MV X-ray LINAC

Shielding Analysis of a Preclinical Bremsstrahlung X-ray FLASH Radiotherapy System within a Clinical Radiation Therapy Vault

Neutron dose evaluation inside high-energy accelerator irradiation vault using LR-115

The Use of Variance Reduction Techniques for Photon Dose Estimation in the Design of Radiotherapy Facilities at 10 and 15 MeV via Monte Carlo Simulations

Automatic Commissioning of a GPU-based Monte Carlo Radiation Dose Calculation Code for Photon Radiotherapy

An investigation of neutron shielding and activation performances of four types of concrete for carbon ion therapy facility

Activation analysis for ITER shielding blanket