Abstract:There is a serious and growing concern about the increased risk of radiation-induced second cancers and late tissue injuries associated with radiation treatment. To better understand and to more accurately quantify non-target organ doses due to scatter and leakage radiation from medical accelerators, a detailed Monte Carlo model of the medical linear accelerator is needed. This paper describes the development and validation of a detailed accelerator model of the Varian Clinac operating at 6 and 18 MV beam energies. Over 100 accelerator components have been defined and integrated using the Monte Carlo code MCNPX. A series of in-field and out-of-field dose validation studies were performed. In-field dose distributions calculated using the accelerator models were tuned to match measurement data that are considered the de facto 'gold standard' for the Varian Clinac accelerator provided by the manufacturer. Field sizes of 4 cm × 4 cm, 10 cm × 10 cm, 20 cm × 20 cm and 40 cm × 40 cm were considered. The local difference between calculated and measured dose on the percent depth dose curve was less than 2% for all locations. The local difference between calculated and measured dose on the dose profile curve was less than 2% in the plateau region and less than 2 mm in the penumbra region for all locations. Out-of-field dose profiles were calculated and compared to measurement data for both beam energies for field sizes of 4 cm × 4 cm, 10 cm × 10 cm and 20 cm × 20 cm. For all field sizes considered in this study, the average local difference between calculated and measured dose for the 6 and 18 MV beams was 14 and 16%, respectively. In addition, a method for determining neutron contamination in the 18 MV operating model was validated by comparing calculated in-air neutron fluence with reported calculations and measurements. The average difference between calculated and measured neutron fluence was 20%. As one of the most detailed accelerator models for both in-field and out-of-field dose calculations, the model will be combined with anatomically realistic computational patient phantoms into a computational framework to calculate non-target organ doses to patients from various radiation treatment plans.

Evaluation of Nuclear Activation of Tungsten Plates for Future Modeling of a Medical Accelerator

Modeling To Characterize Neutron Activation Products In A Medical Linear Accelerator

SU-FF-T-296: Modeling to Characterize Neutron Activation Products in a Medical Linear Accelerator

Assessment of photon and proton-induced activation in particles accelerators

Comparison of Photoneutron Yields in Tungsten Calculated by MCNPX Using Different Photonuclear Cross-Section Data for Typical Radiation Therapy Energies

Beam Energy Considerations for Gold Nano-Particle Enhanced Radiation Treatment

Calculation of photoneutrons produced in the targets of electron linear accelerators for radiography and radiotherapy applications

On the neutron radiation field and air activation around a medical electron linac

SU‐FF‐T‐452: the Manageable Levels of Induced Radioactivity in Medical Accelerators from High Energy Photon Beams

Evaluating activation of the shielding walls of a treatment room using the Monte Carlo method

Measurements of Photoneutrons Produced by A 15 Mev Electron Linac for Radiography Applications

Fluence and dose measurements for an accelerator neutron beam

Evaluating optimal quality assurance and quality control conditions of activation measurements at the accelerator-based boron neutron capture therapy system employing a lithium target

Neutron Activation Analysis Based on AB-BNCT Treatment Room

Neutrons from fragmentation of light nuclei in tissue-like media: a study with GEANT4 toolkit

Confirmation of a realistic reactor model for BNCT dosimetry at the TRIGA Mainz

Assessment of radio-activation using spectroscopy in medical linear accelerators

Neutron dose evaluation inside high-energy accelerator irradiation vault using LR-115

Dependence of neutron rate production with accelerator beam profile and energy range in an ADS-TRIGA RC1 reactor

Monte Carlo Modeling of a 6 and 18 MV Varian Clinac Medical Accelerator for In-Field and Out-of-field Dose Calculations: Development and Validation

An experimental study of the moderator assembly for a low-energy proton accelerator neutron irradiation facility for BNCT