Abstract:PurposeThe Monte Carlo radiation transport method is considered the most accurate approach for absorbed dose calculations in external beam radiation therapy. In this study, an efficient and accurate source model of the Varian TrueBeam 6X STx Linac is developed and integrated with a fast Monte Carlo photon‐electron transport absorbed dose engine, ARCHER‐RT, which is capable of being executed on CPUs, NVIDIA GPUs, and AMD GPUs. This capability of fast yet accurate radiation dose calculation is essential for clinical utility of this new technology. This paper describes the software and algorithmic developments made to the ARCHER‐RT absorbed dose engine.MethodsAMD’s Heterogeneous‐Compute Interface for Portability (HIP) was implemented in ARCHER‐RT to allow for device independent execution on NVIDIA and AMD GPUs. Architecture‐specific atomic‐add algorithms have been identified and both more accurate single‐precision and double‐precision computational absorbed dose calculation methods have been added to ARCHER‐RT and validated through a test case to evaluate the accuracy and performance of the algorithms. The validity of the source model and the radiation transport physics were benchmarked against Monte Carlo simulations performed with EGSnrc. Secondary dose‐check physics plans, and a clinical prostate treatment plan were calculated to demonstrate the applicability of the platform for clinical use. Absorbed dose difference maps and gamma analyses were conducted to establish the accuracy and consistency between the two Monte Carlo models. Timing studies were conducted on a CPU, an NVIDIA GPU, and an AMD GPU to evaluate the computational speed of ARCHER‐RT.ResultsPercent depth doses were computed for different field sizes ranging from 1.5 cm2 × 1.5 cm2 to 22 cm2 × 40cm2 and the two codes agreed for all points outside high gradient regions within 3%. Axial profiles computed for a 10 cm2 × 10 cm2 field for multiple depths agreed for all points outside high gradient regions within 2%. The test case investigating the impact of native single‐precision compared to double‐precision showed differences in voxels as large as 71.47% and the implementation of KAS single‐precision reduced the difference to less than 0.01%. The 3%/3mm gamma pass rates for an MPPG5a multileaf collimator (MLC) test case and a clinical VMAT prostate plan were 94.2% and 98.4% respectively. Timing studies demonstrated the calculation of a VMAT plan was completed in 50.3, 187.9, and 216.8 s on an NVIDIA GPU, AMD GPU, and Intel CPU, respectively.ConclusionARCHER‐RT is capable of patient‐specific VMAT external beam photon absorbed dose calculations and its potential has been demonstrated by benchmarking against a well validated EGSnrc model of a Varian TrueBeam. Additionally, the implementation of AMD’s HIP has shown the flexibility of the ARCHER‐RT platform for device independent calculations. This work demonstrates the significant addition of functionality added to ARCHER‐RT framework which has marked utility for both research and clinical applications and demonstrates further that Monte Carlo‐based absorbed dose engines like ARCHER‐RT have the potential for widespread clinical implementation.

Establishment of a virtual source model of Varian RapidARC linear accelerator with 6 MeV X-ray

An automated commissioning method based on virtual source models: Customizing Monte Carlo dose verification models for individual accelerators

The Monte Carlo Simulation of Tsinghua Homo-Source Dual-Beam Medical Accelerator

A method for selecting reference beam model of VMAT plans with three 6MV beam-matched linear accelerators during radiation oncology

Monte Carlo Modeling of a 6 and 18 MV Varian Clinac Medical Accelerator for In-Field and Out-of-field Dose Calculations: Development and Validation

Monte Carlo simulation of 6 MV flattening-filter-free beams in TrueBeam accelerator

New Capabilities of the Monte Carlo Dose Engine ARCHER-RT: Clinical Validation of the Varian TrueBeam Machine for VMAT External Beam Radiotherapy

The Use of Variance Reduction Techniques for Photon Dose Estimation in the Design of Radiotherapy Facilities at 10 and 15 MeV via Monte Carlo Simulations

Knowledge-based Semi-Automated Optimization of Intensity-Modulated Radiotherapy Plans Using a Volume Modulated Arc Therapy-Configured Model

Absolute dose calibration and output factor simulation for flattened and flattening filter-free Monte Carlo model of 6 MV photon beams

Electron Beam Therapy Mode Analysis of Medical Linac by BEAM Code

Dose Calculation Accuracy of Beam Models in RadCalc for a 1.5 T MR-Linac

A Monte Carlo pencil beam scanning model for proton treatment plan simulation using GATE/GEANT4

The Development Of A Novel Radiation Treatment Modality-Volumetric Modulated Arc Therapy

Monte Carlo simulation of beam characteristics from small fields based on TrueBeam flattening-filter-free mode

Comparison between Monte Carlo simulation and measurement of beam quality and output factor with flattened and flattening filter-free of linear accelerator

Development and validation of an optimal GATE model for proton pencil-beam scanning delivery

Monte Carlo modeling of HD120 multileaf collimator on Varian TrueBeam linear accelerator for verification of 6X and 6X FFF VMAT SABR treatment plans

A torus source and its application for non-primary radiation evaluation

Fitting Monte Carlo simulation results with an empirical model of megavoltage x-ray beams for rapid depth dose calculations in water

A method for in vivo treatment verification of IMRT and VMAT based on electronic portal imaging device