Abstract:This work deals with the effect of rare earth elements (RE) on the laser surface clad coatings. The friction and wear properties of these laser clad coatings were investigated. Laser cladding nickel-based alloy coatings containing various content of rare earth elements were prepared. The microstructure of the clad coatings were observed by scanning electron microscopy (SEM). A microhardness tester was used to measure the microhardness. The crystallographic phase of the clad coatings was determined by an x-ray diffractometer. The friction and wear behavior of the coatings were examined with a block-on-ring friction and wear tester. Then the worn surface of various coatings were analyzed through SEM. The experimental results showed that the addition of RE can refine the microstructure, increase the microhardness and change the crystallographic phase. As a result by RE the friction coefficient of the coatings was decreased and the wear resistance of the coatings was improved. The worn surface of the clad coatings containing RE was less severely destroyed than that without RE.This work deals with the effect of rare earth elements (RE) on the laser surface clad coatings. The friction and wear properties of these laser clad coatings were investigated. Laser cladding nickel-based alloy coatings containing various content of rare earth elements were prepared. The microstructure of the clad coatings were observed by scanning electron microscopy (SEM). A microhardness tester was used to measure the microhardness. The crystallographic phase of the clad coatings was determined by an x-ray diffractometer. The friction and wear behavior of the coatings were examined with a block-on-ring friction and wear tester. Then the worn surface of various coatings were analyzed through SEM. The experimental results showed that the addition of RE can refine the microstructure, increase the microhardness and change the crystallographic phase. As a result by RE the friction coefficient of the coatings was decreased and the wear resistance of the coatings was improved. The worn surface of the clad coa...

Effect of Rare-Earths Carburizing on Friction Behavior of GCr15 Steel Laser Melting Layer

Laser Surface Clad Coatings Modified by Rare Earth

Impact of Laser Shock Processing on Microstructure and Tribological Performance of GCr15 Bearing Steel

Friction and Wear of Rare Earths Modified Carbon Fibers Filled PTFE Composite under Dry Sliding Condition

Influence of Solid Chromizing Doped with Various Rare Earths on Microstructures and Properties of Cr-RE Coatings Fabricated by Pack Cementation

Surface characteristics and wear resistance of GCr15 bearing steel by cryogenic treatment-laser peening

Effects of Surface Texturing and Laminar Plasma Jet Surface Hardening on the Tribological Behaviors of GCr15 Bearing Steel

Effect of rare earth addition on microstructure and corrosion behavior of plasma nitrocarburized M50NiL steel

Effect of Feeding Ca–Mg–RE–Zr Composite Cored Wire During Refining of Liquid Steel on Abrasive Wear Resistance of High-Strength Steels

Microstructure and wear behavior of arc-shaped 40CrNiMo steel after laser hardening

The effect of rare earth on microstructure and wear resistance of plasma electrolytic carburizing layer on 17–4PH stainless steel

Effect of Rare Earth Elements on the Impact Wear Resistance of Nitrocarburizing Layers

Study on sliding friction and wear behavior of M50 bearing steel with rare earth addition

Effect of Rare Earth Elements on Erosion Resistance of Nitrocarburizing Layers of 38crmoal Steel

A STUDY OF CORROSION ELECTROCHEMISTRY OF GCR15 STEEL TREATED BY MULTIPLE METHOD OFLASER MELTING SOLIDIFICATION AND RE DIFFUSED PERMEATION

Study on Improving the Surface Abrasion of Pure Fe by Permeating RE Combined with Laser Melting Modification

Study on fretting friction properties based on GCr15 alloy and liquid epoxy resin protective coatings on GCr15 alloy

Effect of Laser Shock Peening Impact Numbers on Microstructure and Tribological Characteristics of GCr15 Steel

An investigation on the erosion resistance of rare earths nitrocarburized 40 Cr steel

Investigation on Microstructures and Tribological Characteristic of Laser Remelting Layers