Abstract:This work deals with the effect of rare earth elements (RE) on the laser surface clad coatings. The friction and wear properties of these laser clad coatings were investigated. Laser cladding nickel-based alloy coatings containing various content of rare earth elements were prepared. The microstructure of the clad coatings were observed by scanning electron microscopy (SEM). A microhardness tester was used to measure the microhardness. The crystallographic phase of the clad coatings was determined by an x-ray diffractometer. The friction and wear behavior of the coatings were examined with a block-on-ring friction and wear tester. Then the worn surface of various coatings were analyzed through SEM. The experimental results showed that the addition of RE can refine the microstructure, increase the microhardness and change the crystallographic phase. As a result by RE the friction coefficient of the coatings was decreased and the wear resistance of the coatings was improved. The worn surface of the clad coatings containing RE was less severely destroyed than that without RE.This work deals with the effect of rare earth elements (RE) on the laser surface clad coatings. The friction and wear properties of these laser clad coatings were investigated. Laser cladding nickel-based alloy coatings containing various content of rare earth elements were prepared. The microstructure of the clad coatings were observed by scanning electron microscopy (SEM). A microhardness tester was used to measure the microhardness. The crystallographic phase of the clad coatings was determined by an x-ray diffractometer. The friction and wear behavior of the coatings were examined with a block-on-ring friction and wear tester. Then the worn surface of various coatings were analyzed through SEM. The experimental results showed that the addition of RE can refine the microstructure, increase the microhardness and change the crystallographic phase. As a result by RE the friction coefficient of the coatings was decreased and the wear resistance of the coatings was improved. The worn surface of the clad coa...

Laser Surface Clad Coatings Modified by Rare Earth

Microstructural characteristics of laser clad coatings with rare earth metal elements

Rare earth elements modification of laser-clad nickel-based alloy coatings

The effect of rare earth on the structure and performance of laser clad coatings

Microstructure and corrosion resistance of laser clad coatings with rare earth elements

Effect of La2o3 on Hardness Distributions of Laser Clad Ferrite-Based Alloy Coatings

Rare-earth La2O3 modification of laser-clad coatings

Effect of rare earth cerium on microstructure and wear resistance of Ni-base alloy laser-cladded coating

Effect of Rare Earth Oxide CeO2 on Microstructure and Surface Properties of Laser Cladded CoFeCrNiSiB High-Entropy Alloy Coatings

Effect of rare earth cerium on the microstructure and corrosion resistance of laser cladded nickel-base alloy coatings

Effect of laser surface cladding of ceria on the wear and corrosion of nickel-based alloys

Laser cladding in-situ carbide particle reinforced Fe-based composite coatings with rare earth oxide addition

Rare earth effect on the microstructure and wear resistance of Ni-based coatings

Effect of La2O3 on the microstructure and wear resistance of laser clad nickel-based alloy coatings

An Investigation of the Surface Quality and Corrosion Resistance of Laser Remelted and Extreme High-Speed Laser Cladded Ni-based Alloy Coating

Laser Cladding In Situ Carbide-Reinforced Iron-Based Alloy Coating: A Review

Effect of La2O3 on Wear Resistance of Laser-Cladded Fe-Based Alloy Coatings

Effects of Rare Earth Oxide on the Nucleation of Carbide Particles in Laser Cladded MMCp Coating

Investigation on the Tribological Characteristic of Laser Clad Layer

Effect of Rare-Earths Carburizing on Friction Behavior of GCr15 Steel Laser Melting Layer

Study of Design and Microstructure Properties of Laser Clad Multiphase Coupled Nickel-Based Self-Lubricating Coatings