Abstract:Herein, we present the results of an experimental study on the mechanical properties of Fe-C alloys with different carbon contents (0.2, 0.45, and 0.8%) in a wide range of deformation rates (10−3–103 s−1) and abrasive wear resistance, which underwent combined laser thermal (laser surface hardening—LSH) and laser shock wave (Laser Shock Peening—LSP) processing. The combined treatment modes included a different sequence of exposure to laser thermal and laser-induced shock pulses on the material. The amplitude and duration of laser-induced shock waves were measured using a laser Michelson interferometer. The mechanical properties of steel samples were studied under conditions of uniaxial tension under static loads on a standard universal testing machine, the LR5KPlus, and under dynamic loading, tests were carried out on a specialized experimental complex according to the H. Kolsky method using a split Hopkinson rod. The abrasive wear resistance of hardened surfaces was studied using the Brinell–Haworth method. Studies have shown that the use of a combination of LSH and LSP treatments leads to an increase in both the mechanical properties of steels and abrasive wear resistance compared to traditional laser hardening. It has been established that in the combinations considered, the most effective is laser treatment, in which LSP treatment is applied twice: before and after LSH. Thus, after processing steels using this mode, an increase in the depth of the hardened layer was recorded—by 1.53 times for steel 20, by 1.41 times for steel 45, and by 1.29 times for steel U8—as well as a maximum increase in microhardness values by 22% for steel 20, by 27% for steel 45, and by 13% for U8 steel. The use of this mode made it possible to obtain the maximum strength properties of the studied materials under static and dynamic loading, which is associated with an increase in the volume fraction of the strengthened metal and high microhardness values of the strengthened layer of traditional LSH. The dependences of abrasive wear of the studied steels after various combinations of LSP and LSH impacts were established. It is shown that the greatest wear resistance of the studied steels is observed in the case when the LSH pulse is located between two LSP pulses. In this case, abrasive wear resistance increases by 1.5–2 times compared to traditional LSH.

Effect of Laser Shock Peening Impact Numbers on Microstructure and Tribological Characteristics of GCr15 Steel

Impact of Laser Shock Processing on Microstructure and Tribological Performance of GCr15 Bearing Steel

Effect of laser shock peening on the retention ability of surface roughness in forged Cr5 steel

Effects of Multiple Laser Shock Peening Impacts on Microstructure and Wear Performance of Wire-Based Laser Directed Energy Deposition 17-4PH Stainless Steel

Effect of laser shock peening on tribological properties of 55SiMoVA bearing steel

Surface characteristics and wear resistance of GCr15 bearing steel by cryogenic treatment-laser peening

Experimental study on laser peen texturing and tribological properties of E690 high-strength steel

Effect of laser shock peening on wear resistance of M50 steel

Microstructure and High-Temperature Tribological Properties of Ti–6Al–4V Alloy Treated by Laser Shock Peening

Effect of Combined Laser Thermal and Shock Wave Effects on the Mechanical and Tribological Properties of Steels

Laser shock peening induced mechanical properties enhancement of 50CrVA alloy

High temperature wear performance of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy subjected to laser shock peening

The effect of laser shock processing on the microstructures and properties of 2060 Al Li alloys

Effect of laser shock peening on microstructure and mechanical properties of laser cladding 30CrMnSiNi2A high-strength steel

Laser shock peening regulating aluminum alloy surface residual stresses for enhancing the mechanical properties: Roles of shock number and energy

Microstructure and wear behaviors of 17-4 PH stainless steel fabricated by laser cladding with post laser shock peening treatment

Surface morphology evolution and tribological behavior in nanosecond pulsed laser polishing of S136 mold steel

Research on Wear Resistance of AISI 9310 Steel with Micro-Laser Shock Peening

The effect of shot peening on the contact fatigue performance of C40 steel gears after laser surface melting

Microstructural evolution and mechanical behaviors of Al-Cu-Li alloy processed by laser shock peening

Nanoengineering steel's durability: creating gradient nanostructured spheroidal carbides and lath-shaped nano-martensite via ultrasonic shot peening