Abstract:Carbide-free bainitic (CFB) steels with a matrix of bainitic ferrite and thin layers of retained austenite, to reduce the manufacturing costs, usually do not contain alloying elements. However, a few reports were presented regarding the effect of alloying elements on the properties of these steels. Thus, this study evaluates the effects of vanadium and rare earth (Ce-La) microalloying elements on the structure, phase transformation kinetics, and mechanical properties of carbide-free bainite steel containing silicon fabricated by the casting and austempering procedure. Optical and scanning electron microscopy (OM and SEM), electron backscatter diffraction (EBSD), and X-ray diffraction (XRD) were used to study the microstructure and phase structure. The transformation kinetics were examined by a dilatometry test. Hardness, tensile, and impact tests evaluated the mechanical properties. Due to adding alloying elements, the fracture toughness and change in matrix phases relation was studied by the crack tip opening displacement (CTOD) test and SEM fractography. The microstructure of the silicon added sample was completely carbide-free bainite. The test results showed vanadium helped CFB formation, even in continuous cooling. The primary austenite grain (PAG) size grew by vanadium addition. The EBSD phase map illustrates an increment in the percentage of retained austenite by vanadium. In contrast, the addition of 0.03 wt% rare earth reduced the primary austenite grain size and reduced the retained austenite content. The results of the dilatometry test confirmed that vanadium and rare earth addition both reduced the critical cooling rate of the bainite transformation. Vanadium leads to an earlier cessation of bainite transformation, while rare earth elements postpone this transformation. Mechanical tests showed that the tensile strength of carbide-free bainite steels was strongly influenced by the morphology and volume fraction of austenite. Retained austenite, when transformed to martensite during the transformation-induced plasticity (TRIP) phenomenon, leads to increased tensile strength and fracture toughness, or retained austenite with a film-like shape prevents the growth of cracks by blinding the crack tip. The result of the CTOD test exhibited that retained austenite plays the leading role in increasing crack resistance when TRIP occurs.

Effect of rare earth elements on microstructure and mechanical properties of bainite/martensite bearing steel

Effect of Rare Earth Y on Microstructure and Mechanical Properties of High-Carbon Chromium Bearing Steel

Enhanced Impact Toughness of Previously Cold Rolled High-Carbon Chromium Bearing Steel with Rare Earth Addition

Tailoring microstructure evolution and austenite stability of TRIP steels by Rare-Earth micro-alloying

Influence of trace rare earth elements on very high cycle fatigue behavior of hot rolled bearing steel

Effect of Trace Element B on the Microstructure and Mechanical Properties of 8Cr4Mo4V Bearing Steel

Rolling contact fatigue behaviour of M50 bearing steel with rare earth addition

Effects of Rare Earth Additions on Compound Structure and As-Annealed Properties of Cu-12%Ag

Effects of rare earth elements addition on mechanical properties and corrosion behavior of GCr15 bearing steel under different heat treatment conditions

Study on sliding friction and wear behavior of M50 bearing steel with rare earth addition

Effects of rare earth element on the fracture toughness and ductility of 18Ni (350) maraging steel

Effect of rare earth addition on corrosion sensitivity of GCr15 bearing steel in marine environment

Effects of RE (La, Ce) on fcc-bcc martensitic transformation of iron via Bain transformation path

Effects of rare earth elements on inclusions, microstructure and impact toughness of spring steel

Effect of Austempering Temperature on Microstructure Evolution, Mechanical Properties and Wear Resistance of Carbon-free Nano-bainite Steel

Rare earth addition powered corrosion resistance of the surface oxide film on GCr15 bearing steel substrate

Effect of Vanadium and Rare Earth on the Structure, Phase Transformation Kinetics and Mechanical Properties of Carbide-Free Bainitic Steel Containing Silicon

Effect of Rare Earth Elements on Microstructure and Tensile Behavior of Nb-Containing Microalloyed Steels

Effectively improving the hardness-strength-toughness of carburized bearing steel via nanoprecipitates and fine grain structure

Effect of Rare Earth Ce on Structure and Properties in 7CrSiMnMoV Die Steel Castings

Effect of martensite pre-quenching on bainite transformation kinetics, martensite/bainite duplex microstructures, mechanical properties and retained austenite stability of GCr15 bearing steel