Abstract:Under the fouling conditions in stationary coal combustion systems, the sticking/rebound behavior of solid incident particles is a key issue in determining the ash deposition rate. From a dynamic point of view, the bulk fly ash, which dominants the deposited mass, successively interacts with the clean tube, the inner fine deposited layer and the bulk deposited layer during ash deposition. In this paper, we experimentally investigate the time-resolved evolution of ash fouling in a 25 kW coal combustor. The deposited mass flux rapidly reaches a stable state that fluctuates around a mean value of similar to 3 g/(m(2).s) for two kind of probe materials. The rapid initial stage only allows the formation of 1-2 layers of bulk deposited ash, revealing the dominant role of bulk deposit in capturing large incident particles. Inspired by the observation, we apply a 3D adhesive dis-crete element model (DEM) to fully describe the many-body evolving process subject to the incident events of a 30-mu m particle. The simulation agrees well with the experiments when using a higher particle surface energy of 200 mJ/m(2). The rapidly growing feature of ash sticking probability with increasing the bulk deposit layers can be reproduced in this case, and an empirical formula is proposed. It is also validated that, at the deposit growth stage, the newly-deposited particles stay just where they impact. The effectiveness of the DEM tool shall benefit a fully-validated sticking/rebound model under the fouling condition that is convenient for CFD use. (c) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Investigation on the Ash Size Distribution and Attrition During the Coal Combustion in Fluidized Bed

Experimental Investigation On Three Coals Ash Formation

Mechanism on the Contribution of Coal/char Fragmentation to Fly Ash Formation During Pulverized Coal Combustion

EXPERIMENTAL TECHNIQUE ON COAL ASH FORMATION IN CFB COMBUSTION

Experiments on Ash Formation of Different Coals in Circulating Fluidized Bed Combustion

Influence of Coal Ash Components on Attrition Characteristics in Circulating Fluidized Bed

Semi-empirical Technique for Predicting Ash Size Distribution in CFB Boilers

Investigation of Ash Deposition Characteristics in Full-Scale Circulating Fluidized Bed Boiler Burning Zhundong Coal

A six-parameter model to predict ash formation in a CFB boiler

Fragmentation Behavior of the Large Particles during Coal Combustion in Fluidized Bed

Experimental Study on the Effects of Chemical and Mineral Components on the Attrition Characteristics of Coal Ashes for Fluidized Bed Boilers

Pollutant Emission and Attrition Performance of Low Calorific Blended Coals During Co-Combustion in Fluidized Bed

Influence of Ash Characteristics on Ash Deposition in Coal Fired Boiler

Investigation of ash deposition dynamic process in an industrial biomass CFB boiler burning high alkali and chlorine fuel

Ash deposition behavior of a high-alkali coal in circulating fluidized bed combustion at different bed temperatures and the effect of kaolin

Theoretically Studies of the Coal Particle Cluster Combustion Behavior in a Circulating Fluidized Bed

An Experimental Investigation into the Characteristics and Deposition Mechanism of High-Viscosity Coal Ash

Investigation of Ash Deposition Dynamic Process in an Industrial Biomass CFB Boiler Burning High-Alkali and Low-Chlorine Fuel

TEST STUDY ON THE INFLUENCE OF COAL PARTICLE SIZE UPON ASH-SLAG FORMATION IN CFB BOILERS

The Research on Gas Diffusion Through the Coal Ash Layer During the Coal Combustion Process

Prediction and Validation of Ash Sticking Probability under Fouling Conditions in Pulverized Coal Combustion