Abstract:In this paper, an intensive characterization of ash deposits collected from different positions of a pulverized-coal (PC) boiler has been conducted to diagnose the ash slagging and fouling issues within this boiler and to clarify the mass balance/flow of individual major elements and their role on ash slagging and fouling. A lab-scale drop-tube furnace has also been employed to elucidate the partitioning of the major metals during coal pyrolysis and char oxidation, to interpret the PC boiler results. The lignite tested is rich in Na and Ca, which are mostly present as organically bound cations and superfine mineral grains. In the air-fired boiler, the refractory minerals of silicates, aluminates, or aluminosilicates preferentially remained in fireside slag and bottom ash, forming low-temperature eutectics via the interaction with CaO and Fe2O3 on the receding char surface. The complex eutectic Ca-Al-Si consists of the liquidus matrix of the dense layer of fireside slag, in which Fe2+-bearing oxide was highly crystallized into a diamond-shape crystal on the water-tube surface. The ash fouling on Feston and superheater tubes was formed with a thinner Fe-rich layer that is followed by the deposition of Na2SO4 liquids. The abundance of Fe2O3 and CaO in the char matrix is crucial, which triggered the formation of around 80% liquids in the fireside slag with a viscosity of approximating 100 poise at 1200 degrees C. On the reheat tube surface, about 60% of the fully oxidized hematite was even reduced by the metallic iron into magnetite. Na2O and MgO in the char matrix preferentially escaped into flue gas as vaporized metallic vapor and fine oxide particles, respectively. The sulfation of Na-bearing vapor and CaO particle in flue gas was controlled by the partial pressure of Na2SO4 vapor and reaction rate, respectively.

Experimental Study on the Effects of Chemical and Mineral Components on the Attrition Characteristics of Coal Ashes for Fluidized Bed Boilers

Influence of Coal Ash Components on Attrition Characteristics in Circulating Fluidized Bed

Effects of Na and Fe on the Formation of Coal-Derived Soot in a Two-Stage Flat-Flame Burner

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

Experimental Investigation On Three Coals Ash Formation

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

Ash Formation Characteristics of Two Indonesian Coals and the Change of Ash Properties with Particle Size

The Mineralogy Analysis Of Ash Deposition In Refractory Zones In A W-Flame Boiler

12th International Conference on Fluidized Bed Technology EFFECT OF ADDITIVES ON THE ASH FUSION TEMPERATURE

Investigation of Ash Deposition Characteristics in Full-Scale Circulating Fluidized Bed Boiler Burning Zhundong Coal

Characteristics of Ash Deposits in A Pulverized Lignite Coal-Fired Boiler and the Mass Flow of Major Ash-Forming Inorganic Elements

Relationship Between Coal Ash Composition and Ash Fusion Temperatures

Mineral Conversion of Coal-ash in Fusing Process and the Influence to Ash Fusion Point

Effect of particle system on slag formation and shedding characteristics of high alkali metal coal in full-scale circulating fluidized bed boiler based on Nano-CT

Investigation of Biomass, RDF and Coal Ash-Related Problems: Impact on Metallic Heat Exchanger Surfaces of Boilers

Investigation on the Ash Size Distribution and Attrition During the Coal Combustion in Fluidized Bed

Experiments on the Effect of Chemical Components of Coal Ash on the Sintering Temperature

Effects of CaCO 3 on the fusion characteristic and viscosity-temperature behaviour of coal ashes

Influence of Ash Characteristics on Ash Deposition in Coal Fired Boiler

KINETIC ANALYSIS AND EXPERIMENTAL STUDY ON FORMATION MECHANISM OF COAL ASH MINERALS AT HIGH CALCIUM CONTENT IN PCC BOILERS

Research on the Dynamic Characteristic of Ash Deposition in Boilers Burning Coal and Coal Water Slurry