Abstract:In order to find out the influence of ash characteristics on ash deposition,coals from Huangling,Shenmu and Xinwen,with different ash characteristics,were selected as subjects and burned in a trial furnace respectively.Two tests simulating ash deposition were done simultaneously,of which one simulated normal condition with a heat flux probe,and the other simulated ash deposition when combustion fumes rushed toward or onto the furnace wall by a self-made SiC rod.Some characteristic parameters of ash deposits from the three types of coals were compared,such as ash shape,chemical composition,fusion temperature and heat flux variance ratio.Elemental composition,mineral phase and microscopic structure of the ash deposit samples from the three types of coal were acquired by analysing X-ray diffraction,scanning electron microscope and energy spectrum.The results indicate that ash deposition tendency and characteristics of Huangling coal are stronger than those of Shenmu and Xinwen coals,owing to the synergetic effects of calcium and iron.The principal mineral elements giving rise to ash deposition are calcium and iron in Huangling coal,due to the fact that anhydrite,anorthite and hematite are essential mineral phases in ash deposits.In addition,contents of iron in ash deposits are exceedingly high on condition that combustion fumes rush onto furnace wall or tube,which lowers melting temperature of ash deposits considerably.Accordingly,the forming process of ash deposits in heat transfer surface is accelerated.This condition should be avoided in a pulverized coal boiler by adopting some corresponding measures.

Influence of Coal Ash Components on Attrition Characteristics in Circulating Fluidized Bed

Experimental Study on the Effects of Chemical and Mineral Components on the Attrition Characteristics of Coal Ashes for Fluidized Bed Boilers

Experimental Investigation On Three Coals Ash Formation

A general mechanistic model of fly ash formation during pulverized coal combustion

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

Investigation on the Ash Size Distribution and Attrition During the Coal Combustion in Fluidized Bed

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

Influence of Ash Characteristics on Ash Deposition in Coal Fired Boiler

Research on the Dynamic Characteristic of Ash Deposition in Boilers Burning Coal and Coal Water Slurry

Experiments on the Effect of Chemical Components of Coal Ash on the Sintering Temperature

Study on Impact of Coal Particle Ash Content on Bottom Ash Formation Behavior in Fluidized Bed Combustion

Ash deposition behavior of a high-alkali coal in circulating fluidized bed combustion at different bed temperatures and the effect of kaolin

Experiments on Ash Formation of Different Coals in Circulating Fluidized Bed Combustion

Research on Sintering and Fusion Characteristics of Several Representative Coal Ashes

Relationship Between Chemical Components and Coal Ash Deposition Through the DTF Experiments Using Real-Time Weight Measurement System

12th International Conference on Fluidized Bed Technology EFFECT OF ADDITIVES ON THE ASH FUSION TEMPERATURE

Ash Formation Characteristics of Two Indonesian Coals and the Change of Ash Properties with Particle Size

Investigation of Ash Deposition Characteristics in Full-Scale Circulating Fluidized Bed Boiler Burning Zhundong Coal

TEST STUDY ON THE INFLUENCE OF COAL PARTICLE SIZE UPON ASH-SLAG FORMATION IN CFB BOILERS

Relationship Between Coal Ash Composition and Ash Fusion Temperatures

Non-linear Characteristics on Carbon Content of Fly Ash for Different Size Particles in Pulverized Coal Boiler