Abstract:The effect of chlorine, sulfur, moisture and ash content in blended fuels on the partitioning of As, Cr, Cu, Mn, Ni and Pb during bituminous coal and pickling sludge co-combustion were studied in a horizontal tube furnace. Additives including NaCl, FeS2, water and kaolin were used to simulate coal with high chlorine, sulfur, moisture and ash content, respectively. The percentage of pickling sludge used in all conditions was 10%, and the additives added range was 1%-20%. The experimental results indicated that with increasing NaCl addition the percentage of As, Cu and Pb in bottom ash decreased significantly and the Mn percentage in fly ash increased slightly. Under FeS2 addition condition, Cu and Pb percentage in bottom ash increased significantly due to the incomplete decomposition of the generated CuFe2O4 and PbSO4 while the volatilization of As was promoted. With the increasing addition of water, a higher percentage of As moved into the fly ash from bottom ash, while the proportion of Pb in the fly ash decreased obviously. Under kaolin addition, the As partitioning showed a fluctuation trend, while for Pb and Cu the adsorption was the main effect and their distribution in bottom ash increased. Under all conditions, Cr and Ni partitioning were not affected by additives due to the non-volatility and stability of Cr, Ni and their compounds. Bottom ash XRD analysis results showed that CaF2 disappeared under NaCl addition condition and lots of Ca2Al2SiO7 generated. In addition, FeS2 addition caused more CaSO4 generated due to the sulfation reaction, while no obvious change of bottom ash composition was found under neither water nor kaolin addition.

Study on Impact of Coal Particle Ash Content on Bottom Ash Formation Behavior in Fluidized Bed Combustion

Experiments on effects of coal particle ash content on ash formation during fluidized bed combustion

Characteristics Experimental of Fly Ash Release in Combustion Process of Blended Coal

TEST STUDY ON THE INFLUENCE OF COAL PARTICLE SIZE UPON ASH-SLAG FORMATION IN CFB BOILERS

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

Experimental investigation on ash deposition of a bituminous coal during oxy-fuel combustion in a bench-scale fluidized bed

Experiments on the Effect of Chemical Components of Coal Ash on the Sintering Temperature

Experiments on Ash Formation of Different Coals in Circulating Fluidized Bed Combustion

Effect of Coal Ash on NOx Emission of CFB Boilers

Fine Particulate Formation And Ash Deposit Behavior During Sawdust/Coal Co-Firing

Effect of Chlorine, Sulfur, Moisture and Ash Content on the Partitioning of As, Cr, Cu, Mn, Ni and Pb During Bituminous Coal and Pickling Sludge Co-Combustion

Investigation on self-sustained combustion, NOx emissions, and ash characteristics of coal slime in a lab-scale fluidized bed

Effect of Coal Ash Composition on Ash Fusion Temperatures†

Experimental Investigation On Three Coals Ash Formation

EXPERIMENTAL STUDY ON FLUIDIZED BED AGGLOMERATION COMBUSTION USING FLY-ASH SLURRY WITH HIGH CARBON CONTENT AND COAL-WATER MIXTURE AS FUELS

Influence of Coal Ash Components on Attrition Characteristics in Circulating Fluidized Bed

Research on Carbon Content in Fly Ash from Circulating Fluidized Bed Boilers

Ash deposition behavior of a high-alkali coal in circulating fluidized bed combustion at different bed temperatures and the effect of kaolin

Investigation on Ash Deposition Characteristics During Zhundong Coal Combustion

Ash Deposition and Inorganic Element Transformation During Zhundong Coal Combustion