Abstract:To determine the ash characteristics during fluidized bed combustion and gasification purposes, the investigation of the impacts of chemical composition of Jincheng coal ash on the sintering temperature was conducted. A series of experiments on the sintering behavior at 0.5 MPa was performed using the pressurized pressure-drop technique in the combustion and gasification atmospheres. Meanwhile, the mineral transformations of sintered ash pellets were observed using X-ray diffractometer (XRD) analyzer to better understand the experimental results. In addition, quantitative XRD and field emission scanning electron microscope/energy dispersive X-ray spectrometer (FE-SEM/EDS) analyses of ash samples were used for clarifying the detailed ash melting mechanism. These results show that the addition of Fe2O3 can obviously reduce the sintering temperatures under gasification atmospheres, and only affect a little the sintering temperature under combustion atmosphere. This may be due to the presence of iron-bearing minerals, which will react with other ash compositions to produce low-melting-point eutectics. The FE-SEM/EDS analyses of ash samples with Fe2O3 additive show consistent results with the XRD measurements. The CaO and Na2O can reduce the sintering temperatures under both the combustion and gasification atmospheres. This can be also contributed to the formation of low-melting-point eutectics, decreasing the sintering temperature. Moreover, the fluxing minerals, such as magnetite, anhydrite, muscovite, albite and nepheline, contribute mostly to the reduction of the sintering temperature while the feldspar minerals, such as anorthite, gehlenite and sanidine, can react with other minerals to produce low-melting-point eutectics, and thereby reduce the sintering temperatures.

Experiments on effects of coal particle ash content on ash formation during fluidized bed combustion

Study on Impact of Coal Particle Ash Content on Bottom Ash Formation Behavior in Fluidized Bed Combustion

Characteristics Experimental of Fly Ash Release in Combustion Process of Blended Coal

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

Experiments on Ash Formation of Different Coals in Circulating Fluidized Bed Combustion

Experimental investigation on ash deposition of a bituminous coal during oxy-fuel combustion in a bench-scale fluidized bed

TEST STUDY ON THE INFLUENCE OF COAL PARTICLE SIZE UPON ASH-SLAG FORMATION IN CFB BOILERS

Experiments on the Effect of Chemical Components of Coal Ash on the Sintering Temperature

Effect of Coal Ash on NOx Emission of CFB Boilers

Effects of coal ash on iron‐based oxygen carrier in chemical‐looping combustion using three different rank coals as fuel

Research on Carbon Content in Fly Ash from Circulating Fluidized Bed Boilers

EXPERIMENTAL STUDY ON FLUIDIZED BED AGGLOMERATION COMBUSTION USING FLY-ASH SLURRY WITH HIGH CARBON CONTENT AND COAL-WATER MIXTURE AS FUELS

Effect of Coal Ash Composition on Ash Fusion Temperatures†

Experiments of the effects of reaction atmosphere on the coal ash sintering temperature

Influence of Ash Characteristics on Ash Deposition in Coal Fired Boiler

Experimental Study on the Porous Structure of Variously Sized Fly Ash Particles under Different Combustion Conditions

Fine Particulate Formation And Ash Deposit Behavior During Sawdust/Coal Co-Firing

Effect of Chlorine, Sulfur, Moisture and Ash Content on the Partitioning of As, Cr, Cu, Mn, Ni and Pb During Bituminous Coal and Pickling Sludge Co-Combustion

Investigation on the Ash Size Distribution and Attrition During the Coal Combustion in Fluidized Bed

Influence of Ash Composition on the Sintering Behavior During Pressurized Combustion and Gasification Process

Research on Combustion Characteristics of Mixed Fuels of Fly-Ash and Coal