The morphological and mineralogical characteristics and thermal conductivity of ash deposits in a 220 MW CFBB firing Zhundong lignite
Xiaofei Long,Jianbo Li,Hongjian Wang,Yintang Liang,Xiaofeng Lu,Dongke Zhang
DOI: https://doi.org/10.1016/j.energy.2022.125842
IF: 9
2022-10-28
Energy
Abstract:Formation of ash deposit on heat transfer surfaces during Zhundong lignite (ZD) combustion in circulating fluidized bed (CFB) boiler has affected boiler operation and its thermal efficiency. This work therefore characterised the morphology, mineralogy and thermal conductivity of the ash deposits in a 220 MW CFB boiler firing ZD for an improved understanding of deposit characteristics. By using XRF, SEM-EDS, XRD, and laser conductometer, results revealed that deposits on superheaters and reheaters were as thick as 3.0–4.5 cm. Moreover, the inner layer of the deposits consisted of fine ash particles enriching in Na, Ca and S in the forms of Na 2 SO 4 , CaSO 4 , and Na 2 Ca(SO 4 ) 2 , whereas the outer layer comprising CaSO 4 , Na 6 Ca 2 Al 6 Si 6 O 24 (SO 4 ) 2 , Fe 2 O 3 , SiO 2 and Mg 2 SiO 4 with more SiO 2 and Al 2 O 3 presented. Besides, thermal conductivity of the inner layer was ca. 1.83 W/(m · K), and that of the middle layer with an increased pore size was ca. 1.50 W/(m · K), both of them were independent of temperature at 550–900 °C and overweighed the out layer being 0.65–0.82 W/(m · K). This would lead to an increase in coal consumption of ca. 12.9%, highlighting the severity of deposit build-up in adversely impacting the heat transfers and deteriorating the fuel economics during ZD CFB combustion.
energy & fuels,thermodynamics