Abstract:Catalytic steam reforming of ethanol is considered as a promising technology for producing H2 in the modern world. In this study, using a fixed‐bed reactor, steam reforming of ethanol was performed for production of carbon nanotubes (CNTs) and H2 simultaneously at 600°C on Ni/CaO catalysts. Commercial CaO and a synthetic CaO prepared using sol‐gel were scrutinized for ethanol's catalytic steam reforming. Analysis results of N2 isothermal adsorption indicate that the CaO synthesized by sol‐gel has more pore volume and surface area in comparison with the commercial CaO. When Ni was loaded, the Ni/CaO catalyst shows an encouraging catalytic property for H2 production, and an increase in Ni loading could improve H2 production. The Ni/CaO catalyst with sol‐gel CaO support has presented a higher hydrogen production and better catalytic stability than the catalysts with the commercial CaO support at low Ni loading. The highest hydrogen yield is 76.8% at Ni loading content of 10% for the Ni/sol‐gel CaO catalyst with WHSV of 3.32/h and S/C ratio of 3. The carbon formed after steam reforming primarily consists of filamentous carbons and amorphous carbons, and CNTs are the predominant type of carbon deposition. The deposited extent of carbon on the used Ni/CaO catalyst lessen upon more Ni loading, and the elongated CNTs are desired to be formed at the surface of the Ni/sol‐gel CaO catalyst. Thus, an efficient process and improved economic value is associated with prompt hydrogen production and CNTs from ethanol steam reforming.

Hydrogen Source Technology for Fuel Cell:Study on Ethanol Steam Reforming to Produce Hydrogen at Middle or Low Temperature

Hydrogen from steam reforming of ethanol in low and middle temperature range for fuel cell application

From Steam Reforming of Ethanol at Low Temperature over , and Catalysts for Fuel-Cell Application

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Hydrogen Production from Ethanol Steam Reforming over Ni/Al2O3 and Ni/La2O3 Catalysts at Low Temperature

Studies on Ni/Al2O3 Catalyst for Hydrogen Production from Ethanol Steam Reforming

Novel high stability hydrogen production from ethanol steam reforming over catalyst of nano-NiO particles based on flowerlike CeO2 microspheres for EH hybrid vehicle application

Hydrogen Production from Steam Reforming of Ethanol Using Ni/CeO2 and Ni-Cu/CeO2 Catalysts

Hydrogen Production by Steam Reforming of Ethanol over Flowerlike Micro Spheres NiO/La2O3 Catalyst

Technology of Hydrogen Sources for Fuel Cells--the Development of Hydrogen Production from Ethanol Reforming

Hydrogen production by steam reforming of ethanol over flowerlike micro spheres NiO/CeO 2 catalyst

Influence of Preparation Conditions of Ni/Al_2O_3 Catalyst on Its Activity in ydrogen Production by Ethanol Steam Reforming

Steam Reforming of Model Compounds and Fast Pyrolysis Bio-Oil on Supported Nickle Metal Catalysts for Hydrogen Production

Renewable Energy from Nature-Hydrogen Production from Bio-ethanol Steam Reforming

Development in Catalytic Systems in Hydrogen Production via Ethanol Steam Reforming

Hydrogen production from ethanol by steam reforming with recyclable NiCaO x /NaCl catalysts

Steam reforming of ethanol for hydrogen production: influence of catalyst composition (Ni/Al2O3, Ni/Al2O3–CeO2, Ni/Al2O3–ZnO) and process conditions

Innovative Cu/Ni/Fe/γ-Al2O3/Al Mesh-Type Catalyst and Compact Plate Reactor Design for Steam Reforming of Dimethyl Ether

Cu/ZrO2 Catalysts for Methanol Steam Reforming

Steam Reforming of a Diesel Surrogate to Produce Hydrogen-Rich Syngas for Solid Oxide Fuel Cells

Ethanol steam reforming on Ni/CaO catalysts for coproduction of hydrogen and carbon nanotubes