Abstract:A strategic option for the production of H2 from renewable resources is use of the ethanol steam reforming reaction. Catalysts based on nickel have been widely investigated for this reaction, offering the advantages of low cost and high activity. However, a difficulty is that nickel may be strongly deactivated by coke formation. Perovskite-type mixed oxides are promising precursors for nickel-based catalysts, since their reduction leads to the formation of highly dispersed metal particles that can mitigate carbon deposition. However, high calcination temperatures are required for perovskite structure formation, resulting in low surface areas and limiting the effectiveness of this method. In order to address this difficulty, the present work proposes a novel strategy whereby the perovskite-type oxide LaNiO3 is supported on SBA-15. Characterization of the catalysts was performed using XRF, XRD, SEM, TPR, TEM, BET, H2-TPD, and TGA techniques. Their performances were then evaluated in catalysis of the ethanol steam reforming reaction to produce hydrogen. Calcination at 750 °C resulted in formation of highly dispersed perovskite on a support that presented high specific surface area. The catalyst obtained from reduced LaNiO3/SBA-15 with 33 wt% perovskite was the most active in the reaction. Analyses using TGA and SEM showed the formation of carbon mainly over Ni catalysts obtained from bulk LaNiO3 perovskite, while supporting LaNiO3 on SBA-15 led to lower deposition of carbon. The superior performance of this material in catalysis could be attributed to the dispersion of the perovskite on SBA-15, resulting in smaller size of the Ni metal particles formed during the reduction, compared to the catalyst derived from bulk perovskite. This promising method could be used in the production of a wide range of other catalysts.

Influence of Preparation Conditions of Ni/Al_2O_3 Catalyst on Its Activity in ydrogen Production by Ethanol Steam Reforming

Studies on Ni/Al2O3 Catalyst for Hydrogen Production from Ethanol Steam Reforming

Hydrogen Production from Ethanol Steam Reforming over Ni/Al2O3 and Ni/La2O3 Catalysts at Low Temperature

Effects of Preparation Method on the Performance of Ni/Al 2 O 3 Catalysts for Hydrogen Production by Bio-Oil Steam Reforming

Steam reforming of ethanol for hydrogen production: influence of catalyst composition (Ni/Al2O3, Ni/Al2O3–CeO2, Ni/Al2O3–ZnO) and process conditions

From Steam Reforming of Ethanol at Low Temperature over , and Catalysts for Fuel-Cell Application

Ni-hydrocalumite Derived Catalysts for Ethanol Steam Reforming on Hydrogen Production

Steam reforming of ethanol for hydrogen production over NiO/ZnO/ZrO2 catalysts

Hydrogen Production from Steam Reforming of Ethanol Using Ni/CeO2 and Ni-Cu/CeO2 Catalysts

Influence of calcination temperature of Ni/Attapulgite on hydrogen production by steam reforming ethanol

Hydrogen production by ethanol steam reforming over Ni–Co–Al mixed oxides derived from LDH

Catalytic Steam Reforming of Ethanol for Hydrogen Production over Ni/Ceo2-Zro2 Catalysts

Effect of NiO on the Catalytic Performance of Au/TiO_2 Catalyst for Hydrogen Production from Methanol Steam Reforming

Effect of Ca and Co over Ni–Al Mixed Oxides for Hydrogen Production by Ethanol Steam Reforming

Steam reforming of ethanol over Ni/MgAl2O4 catalysts

Influence of hydrothermal treatment on structural property of NiZrAl mixed-metal oxides and on catalytic steam reforming of glycerol for hydrogen production

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

Improving Coking Resistance and Catalytic Performance of Ni Catalyst from LaNiO3 Perovskite by Dispersion on SBA-15 Mesoporous Silica for Hydrogen Production by Steam Reforming of Ethanol

Hydrogen Production by Steam Reforming of Ethanol over Flowerlike Micro Spheres NiO/La2O3 Catalyst

Ethanol Steam Reforming over Ni/ZSM-5 Nanosheet for Hydrogen Production

Study of the Metal-Support Interaction and Electronic Effect Induced by Calcination Temperature Regulation and Their Effect on the Catalytic Performance of Glycerol Steam Reforming for Hydrogen Production